User`s guide

Dexcom G4 PLATINUM Professional System User’s Guide | 55
“AM” or “PM.” You will return to the Settings menu.
You might need to reset the receiver’s time and date if the rechargeable
battery drains. If this happens, the receiver will alert you and
automatically take you to the Time/Date setting screen.
5.2.3 ENTERING THE TRANSMITTER ID
Any time you switch to a new transmitter and/or receiver you must enter
the transmitter ID into the receiver. The transmitter ID is a series of 5
numbers and/or letters that can be found in the following locations:
 •Onthetransmitterboxlabel
 •Onthebottomofthetransmitter
IfyoucannotndthetransmitterID,pleasecontactDexcomTechnical
Support (see Chapter 15, User Assistance).
You can only set the transmitter ID when you are not in a sensor
session. During a sensor session, “Transmitter ID” will not be an option
on the Settings menu.
To enter the transmitter ID follow these steps:
1. From the Settings menu, press the UP or
DOWN button to scroll to “Transmitter ID”
and press the SELECT button.
2.Startwiththerstnumberorletter(donotenter“SN”):
Settings menu,
Transmitter ID highlighted