User`s guide

Dexcom G4 PLATINUM Professional System User’s Guide | 53
(1) Press the UP or DOWN button to select the alert level. The low
alert can be changed in steps of 5 mg/dL, and the high alert can
be changed in steps of 10 mg/dL.
(2) Press the SELECTbuttontoconrmthealertlevel.
•YoucanalsochangethealertlevelsintheAlertsmenu.
•Theunitofmeasurement(mg/dL)isnotadjustable.
•Ifyouneedtochangethetime,dateortransmitterIDafter
you complete the Setup Wizard see Section 5.2, The Settings
Menu.
The Setup Wizard is now complete. To start using the Dexcom G4
PLATINUM Professional CGM System you must insert a sensor (see
Chapter 6, Inserting a Sensor and Starting a Sensor Session).
5.2 THE SETTINGS MENU
The Settings menu lets you change the time, date or transmitter ID. The
SetupWizardonlyworksthersttimeyouturnonthereceiver,butyou
can always use the Settings menu to make changes to the transmitter
ID, time and date, etc.
5.2.1 GETTING TO THE SETTINGS MENU
1. Press the SELECT button to turn on the receiver. The 3-hour trend
WARNING
Low/high glucose alerts and the 55 mg/dL low glucose
alarm are all disabled when using the Dexcom G4
PLATINUM Professional System in blinded mode and
will not alert you when the glucose is low or high. Check
blood glucose meter if there are any signs or symptoms
of low or high glucose.