User`s guide
52 | Dexcom G4 PLATINUM Professional Continuous Glucose Monitoring System
5
(1) Press the UP or DOWN button to
enter the transmitter ID.
(2) Press the RIGHT or SELECT
button to move to the next space.
(3) Press the SELECT button after
you enter the last number or letter
toconrmthetransmitterID.
The transmitter ID is a unique code with 5 numbers and/or letters found
in the following locations:
•Onthetransmitterboxlabel
•Onthebottomofthetransmitter
c. Set the low and high glucose alert values appropriate for each
individual patient. The low and high glucose alerts are pre-set to 80
mg/dL and 200 mg/dL but can be changed.
NOTE: Even though alerts and alarm for low or high glucose levels
are inactive in blinded mode, you must set the low and high alert
levels as part of the Setup Wizard process in order to proceed.
Transmitter ID setting screen
High Alert setting screenLow Alert setting screen