User`s guide

Dexcom G4 PLATINUM Professional System User’s Guide | 51
CHAPTER 5: DEXCOM G4 PLATINUM
PROFESSIONAL SYSTEM INITIAL SETUP
ThischapterhelpsyouwhenyourstsetuptheContinuousGlucose
Monitoring system. Read this chapter before you start.
5.1 SETTING UP THE RECEIVER AND PAIRING
WITH THE TRANSMITTER
TheSetupWizardguidesyouthroughsetupthersttimeyouturnon
the receiver. These set up tasks are only needed to be done when a
newreceiverisusedforthersttime.
1. Remove the transmitter from its packaging. Wait 10 minutes for the
transmitter to turn on before setting up the receiver.
2. Make sure the receiver is fully charged (see Chapter 4, Section 4.1,
Charging The Receiver Battery).
3. Press the SELECT button on the receiver to turn it on. The Setup
Wizard will guide you to enter the following setup information:
a. Set the time and date. The date format is YYYY/MM/DD.
(1) Press the UP or DOWN button to
enter the current date and time.
(2) Press the RIGHT or SELECT button
to move to the next section.
(3) Press the SELECTbuttontoconrm
time and date.
b. Enter the transmitter ID.
Time/Date setting screen