User`s guide
Dexcom G4 PLATINUM Professional System User’s Guide | 143
11.2 REMOVING A SENSOR
When you remove the sensor, make sure to pull out the sensor
pod while the transmitter is still attached.
1. Gently peel up the sensor pod adhesive patch from the skin. This will
pull out the sensor.
WARNING
Sensors may fracture on rare occasions. If a sensor
breaks and no portion of it is visible above the skin, do
not attempt to remove it. Seek professional medical help
ifyouhavesymptomsofinfectionorinammation—
redness,swellingorpain—attheinsertionsite.Ifyou
experience a broken sensor, please report this to our
Technical Support department at 1.877.339.2664 or
1.858.200.0200.
Keep the transmitter
in the sensor pod
Peel up the sensor pod
adhesive patch
Completely remove
the adhesive patch