User's Manual

60
Normal profile: the default profile when you receive your system. This profile sets all alerts and
alarms to higher volume beeps.
Attentive profile: when you need your alert to be the most noticeable. This profile sets all the alerts
and alarm to loud and highly distinctive melodies.
“HypoRepeat” profile: very similar to the normal profile, but it continuously repeats the fixed low
alarm every 5 seconds until your sensor glucose reading rises above 55 mg/dL or is confirmed. This profile
can be helpful if you want extra alerts for severe low sensor glucose readings.
The “Try It” feature is found under the Profiles menu and lets you to hear an example of each alert and
alarm.
9.3.2 ALERT PROFILE DETAILS
PROFILE TYPE
VIBRATE
SOFT
NORMAL
ATTENTIVE
HYPOREPEAT
High Alert
2 long vibrates 2 long vibrates
+ 2 low beeps
2 long vibrates
+ 2 medium
beeps
2 long vibrates
+ ascending
melody
2 long vibrates
+ 2 medium
beeps
Low Alert
3 short vibrates 3 short vibrates
+ 3 low beeps
3 short vibrates
+ 3 medium
beeps
3 short vibrates
+ descending
melody
3 short vibrates
+ 3 medium
beeps
Rise Alert
2 long vibrates 2 long vibrates
+ 2 low beeps
2 long vibrates
+ 2 medium
beeps
2 long vibrates
+ 1 short
ascending
melody
2 long vibrates
+ 2 medium
beeps
Fall Alert
3 short vibrates 3 short vibrates
+ 3 low beeps
3 short vibrates
+ 3 medium
beeps
3 short vibrates
+ 2 short
descending
melodies
3 short
vibrates + 3
medium beeps
Out of Range
Alert
1 long vibrate 1 long vibrate
+ 1 low beep
1 long vibrate
+ 1 medium
beep
1 long vibrate +
3 short
repeating
melodies
1 long vibrate +
1 medium beep
Fixed Low
4 short 4 short 4 short vibrates 4 short vibrates 4 short vibrates