User's Manual

56
If you set your rise rate to 3 mg/dL per minute and your sensor glucose readings rise at this rate or faster,
the “RISING double arrow” screen shows, and the receiver vibrates or beeps in line with your profile
settings.
These steps show how to change your rise or fall rate alert settings.
1. Press the
UP
or
DOWN
button to choose “Rise Rate” or “Fall Rate,” and press the
SELECT
button.
2. Highlight “On/Off” and then press the
SELECT
button.
3. Press the
UP
or
DOWN
button to choose “On” or “Off.” Then, press the
SELECT
button to select “On” or
“Off.”