User's Manual

• Re-alarm: The receiver automatically alerts again 30 minutes after you press the

SELECT

button to clear

it, if your sensor glucose readings are still at or below 55 mg/dL.

• Your receiver does not alert if you have a sensor glucose reading outside your target range and you

calibrated in the last 5 minutes.

• The receiver alerts if your sensor glucose reading stays outside your target range after five minutes.

9.1.3 GETTING TO THE ALERTS MENU

1. Press the

SELECT

button to turn on the receiver. The 3-hour trend graph shows.

2. Press the

SELECT

button to see the Main Menu.

3. From the Main Menu, press the

DOWN

button to scroll to “Alerts,” and press the

SELECT

button.

The Alerts menu shows.

9.1.4 HIGH AND LOW GLUCOSE ALERTS

The steps for setting both the high alert and the low alert are the same.

The following steps show you how to change your high and low alert settings.

1. From the Alerts menu, press the

DOWN

button to select “High Alert” or “Low Alert” and press the

SELECT

button.

2. Highlight “On/Off,” and then press the

SELECT

button to set this option. A check mark shows next to the

current setting.