User's Manual

• Avoid using the same spot repeatedly for sensor insertion. Never use the same site for 2 sensor sessions

in a row.

• You may need to shave the area where you plan to put the sensor so the adhesive patch sticks securely.

• Make sure there are no traces of lotions, perfumes or medications on the area.

6.4 PLACING THE SENSOR

WARNING

Do not use the Dexcom G4 PLATINUM System for treatment decisions, such as how

much insulin you should take. The Dexcom G4 PLATINUM System does not replace a

blood glucose meter. Always use the values from your blood glucose meter for

treatment decisions. Blood glucose values may differ from sensor glucose readings.

Using the sensor glucose readings for treatment decisions could lead to low or high

blood glucose value.

1. Clean your skin at the sensor placement site with an alcohol wipe. Make sure the area is clean and

completely dry before you insert the sensor.

2. Remove the adhesive backing from the sensor pod one half at a time, using the white tabs on the

backing. Hold the sensor by the applicator barrel, and try not to touch the sticky adhesive patch.

3. Place the sensor horizontally, NOT vertically, on your skin.

4. Move your fingers around the adhesive patch to secure the tape to your skin.

5. Hold the applicator, and pull the safety lock straight out away from the applicator, in the direction of the

arrows in the picture.