User's Manual

(1) Press the

DOWN

button to select your alert level. The low alert can be changed in steps of 5

mg/dL and the high alert can be changed in steps of 10 mg/dL.

(2) Press the

SELECT

button to confirm your alert level.

• You can also change your alert levels in the Alerts menu.

• The unit of measure (mg/dL) is not adjustable.

• If you need to change the time, date or transmitter ID after you complete the Setup Wizard see

Section 5.2, The Settings Menu.

The Setup Wizard is now complete. To start using your Dexcom G4 PLATINUM CGM System you must

insert a sensor (see Chapter 6, Inserting a Sensor and Starting a Sensor Session).

5.2 THE SETTINGS MENU

The Settings menu lets you change the time, date or transmitter ID. The Setup Wizard only works the first

time you turn on your receiver, but you can always use the Settings menu.

5.2.1 GETTING TO THE SETTINGS MENU

1. Press the

SELECT

button to turn on the receiver. The 3-hour trend graph shows.

2. Press the

SELECT

button to see the Main Menu.

3. From the Main Menu, press the

DOWN

button to scroll to “Settings” and press the

SELECT

button.

The Settings menu shows:

5.2.2 SETTING YOUR RECEIVER TIME AND DATE

1. From the Settings menu, press the

DOWN

button to scroll to “Time/Date,” and press the

SELECT

button.