User's Manual

G4-Global System User’s Guide | 99

8.2.2 SETTING THE DATE AND TIME FOR AN EVENT

When you enter an event you will be prompted to check that the date and time

for that event are correct. The default date and time for events you enter is the

current date and time stored in the Receiver.

1. To change the date and time for an event, press

the

RIGHT TOGGLE button to highlight each

value in the date and time. Then, press the

TOP or BOTTOM TOGGLE button to make any

adjustments and then press the

RIGHT TOGGLE

button to move to the next value. After choosing

AM or PM, press the

SELECT button. You will

advance to the Event conﬁ rmation screen.

8.2.3 CARBOHYDRATES

The Carbs Event lets you enter the amount of carbohydrates you have

consumed, up to 250 grams for any particular date and time.

1. Press the

TOP or BOTTOM TOGGLE button to

choose “Carbs” and press the

SELECT button.

2. Press the

TOP or BOTTOM TOGGLE button to

enter your carb amount (0-250 grams), and press

the

SELECT button. The number that ﬁ rst appears

on this screen will be the last number you entered

or the default amount of 50 grams.

NOTE: If you change the date or time for any event, it only applies to that

event and will not change the current date and time in your Receiver.