User's Manual

84 | Continuous Glucose Monitoring System

7.1.3 ENTERING YOUR TRANSMITTER ID

Any time you switch to a new Transmitter and/or Receiver (as a replacement

to the Transmitter and Receiver that came in your kit) you must enter the

Transmitter ID into your Receiver. The Transmitter ID is a series of 2 letters and

5 numbers on the back of the Transmitter. Entering the ID will begin the unique

wireless radio frequency (RF) communication between the Transmitter and

Receiver.

To enter the Transmitter ID, perform the following steps:

1. From the Settings menu, press the

TOP or

BOTTOM TOGGLE button to scroll to “Transmitter

ID” and press the

SELECT button.

HELPFUL HINTS:

• The date in the Receiver is set at the factory to Paciﬁ c Standard Time

(PST).

• Make sure to set the correct date and time on your Receiver.

• When setting values for the time or date, press and hold the TOP

BOTTOM TOGGLE button to scroll through the ﬁ elds more quickly.

• You might need to reset the Receiver’s time and date if the rechargeable

battery is drained. If this happens, the Time Loss Alert will automatically

take you to the Time/Date Setting Screen.

NOTE: You can only set your Transmitter ID when you are not in a Sensor

session. During a Sensor session, “Transmitter ID” will not appear as an

option on the Settings menu.