User's Manual

76 | Continuous Glucose Monitoring System
Once the Replace Sensor Now screen appears, press any button on the
Receiver to clear this noti cation.
6.2 AUTOMATIC SENSOR SHUT-OFF
The Receiver will tell you how much time you have remaining until your
G4-Global Sensor session is complete. The Sensor Expiration screen will
appear at 6 hours, 2 hours and 30 minutes before your 7-day session ends.
You can to set the Receiver to vibrate and/or beep with these displays if you
choose (see Chapter 8, Section 8.5). After the 6-hour, 2-hour, and 30-minute
reminders, you will still continue to receive glucose readings. You can clear any
of these screens by pressing any button on the Receiver. You must remove your
Sensor after the nal Sensor Expiration screen (00:00:00) appears.
6
Sensor Expiration Noti cation
End of session
6-hour Sensor Expiration
Noti cation
30-minute Sensor Expiration
Noti cation
2-hour Sensor Expiration
Noti cation