User's Manual

G4-Global System User’s Guide | 63
5.3.1 HIGH GLUCOSE ALERT
When your G4-Global System readings are at or
above your High Alert level, the screen shown to the
right will appear. You can also set the Receiver to
beep and vibrate when this screen appears
(see Chapter 2, Section 2.5). The default level is set
at 200 mg/dL, but you can adjust this value.
When you set the High Glucose Alert, the level is
indicated by the top of the gray zone on the Trend
Graphs. (If the Low Glucose Alert is not set, the High
Glucose Level is indicated by a horizontal gray line.)
The Receiver will continue to alert you until you press
any Receiver button to clear the Alert, or until your
glucose readings drop below your High Glucose Alert
level. You can choose to have the Receiver re-alert
you every 15, 30 minutes or 1, 2, 3, 4, or 5 hours after
clearing the Alert, by changing your Snooze settings
(see Chapter 8, Section 8.7). Snooze settings for the
High Glucose Alert are only available if Advanced
features is turned on (see Chapter 8, Section 8.1).
High Glucose Alert set
at 200 mg/dL
High Glucose
Alert Setting