User's Manual

G4-Global System User’s Guide | 41
HELPFUL HINTS:
• Make sure you hear 2 clicks when you snap the Transmitter in place (see
Step 3). This helps ensure your device is water resistant (see Section 3.10).
• Make sure that you have entered the correct Transmitter ID into your
Receiver. See Chapter 2, Section 2.4 for instructions on how to enter the
Transmitter ID into your Receiver.
Install Transmitter
in Sensor Pod
Transmitter Installed
Transmitter Latch
Remove
Transmitter Latch
5. Remove the Transmitter Latch by holding the end of the Latch and quickly
twisting off the Latch away from your body.