User's Manual

30 | Continuous Glucose Monitoring System
2
4. Next, on the High Alert menu (example), press
the
TOP or BOTTOM TOGGLE button to choose
“Level” and press the SELECT button. Press
the
TOP or BOTTOM TOGGLE button to enter
your Alert value (120 to 400 mg/dL in 10 mg/dL
increments for a High Alert and 60 to 100
mg/dL in 5 mg/dL increments for a Low Alert).
The starting value that fi rst appears on this screen
is the default value of 200 mg/dL (High Alert) and
80 mg/dL (Low Alert), or the values you set in the
Setup Wizard.
You have the option to set a snooze time to re-alert you (see Chapter 8, Section
8.7, Setting a Snooze Time for Your High and Low Alerts).
Example-High Alert
3. Next, on the High Alert menu (example), press
the
TOP or BOTTOM TOGGLE button to choose
“Type” and press the SELECT button. Then,
choose “Vibrate Then Beep” or “Vibrate Only”
as your Alert delivery option, and press the
SELECT button.
- Vibrate Then Beep (vibrate, then a vibrate and a
beep every 5 minutes)
°
High Alert Beep (a series of tones in ascending order, followed by a few
steady high tones)
°
Low Alert Beep (a series of tones in descending order, followed by a few
steady low tones)
- Vibrate Only (vibrate every 5 minutes)
NOTE: Alerts can be acknowledged by pressing any button on the Receiver.
Example-High Alert