User's Manual

26 | Continuous Glucose Monitoring System

4. Set your Low and High Glucose Alert Levels

The Setup Wizard is now completed. You will now need to insert a Sensor and

start a Sensor session to begin a continuous glucose monitoring session (see

Chapter 3).

2.2 TURNING THE RECEIVER ON

1. Press the SELECT button to turn the Receiver on. The 3-Hour Trend Graph

will appear.

2. Press the

SELECT button to display the Main Menu.

NOTE:

• When using the Setup Wizard, the Low and High Glucose Alerts are

already turned on and are set to vibrate and beep. Only the Low Alert and

High Alert “levels” can be adjusted in the Setup Wizard. To make other

changes, see Section 2.5.

• See Sections 2.3, 2.4 and 2.5 and Chapter 7 for more information on

setting the time and date, entering Transmitter ID, and Low and High

Glucose Alerts from the Main Menu.