User's Manual

104 | Continuous Glucose Monitoring System
2. On the Fall Rate menu (example), press the TOP
or
BOTTOM TOGGLE button to choose “On/Off”.
Then, press the SELECT button to select “On”. If
you do not want to receive this type of Rate Alert
press the
SELECT button to choose “Off”.
3. Next, on the Fall Rate menu (example), press
the
TOP or BOTTOM TOGGLE button to choose
“Type” and press the
SELECT button. Then,
choose “Vibrate Then Beep” or “Vibrate Only” as
your alert delivery option and press the
SELECT
button.
- Vibrate Then Beep (vibrate, then a vibrate and a
beep every 5 minutes)
°
High Alert Beep (a series of tones in ascending order, done in pairs)
°
Low Alert Beep (a series of tones in descending order, done in pairs)
- Vibrate Only (vibrate every 5 minutes)
4. Next, on the Fall Rate menu (example), press
the
TOP or BOTTOM TOGGLE button to choose
“Level” and press the
SELECT button. Then,
choose whether the alerts should be delivered
when your glucose levels are falling either
“2 mg/dL/min” (2 mg/dL or more per minute) or
“3 mg/dL/min” (3 mg/dL or more per minute). Press
the
SELECT button.
When fi nished, press the
LEFT TOGGLE button to return to the Alerts menu.
8
Example-Fall Rate menu
Example-Fall Rate
NOTE: Alerts can be acknowledged by pressing any button on the Receiver.
Example-Fall Rate