Bluetooth Music User Manual 1
Table of contents 1. Introduction……………………………………………………………………………..3 1.1 Bluetooth Music……………………………………………………………………………..3 1.2 Accessory……………………………………………………………………………………….3 1.3 Function Table………………………………………………………………………………..4 1.4 Features………………………………………………………………………………………….5 1.5 Specification……………………………………………………………………………………8 1.6 System requirement……………………………………………………………………….8 2.Setting up the Bluetooth Music ………………………………………8 3.Pairing the Bluetooth Music ……………………………………………………..9 4.
1. Introduction Please read the instructions carefully before using Bluetooth Music. Please charge the battery about 3-5 hours before using the Bluetooth Music first time. 1.1 Bluetooth Music 1.
1.
1.3 Function Table Function Operation Power ON/OFF 3.5mm to 3.5 female phone jack 1.4 Press long power button 5 sec until LED slow blue light Power on (new pairing mode) Press power button 3 seconds Power ON/Off Plug the audio cable to 3.5mm female phone jack input Features 1.Support Bluetooth v3.
1.4 Features 2. Build-in high performance stereo audio codec Let you enjoy high quality music stream from your device. 3.Truly Protable Device You can take Bluetooth music to anywhere, such as in the car and friends house etc…..
1.4 Features 4. Build-in Battery Bluetooth Music built-in battery, let you carry it to anywhere that listen to music. 5.Support AUX Let you easily switches between calls and music in the car.
1.5 Specification Bluetooth Bluetooth profile Bluetooth V3.0 with EDR HSP(Headset Profile), HFP(Hands-Free Profile) , A2DP(Advanced Audio Distribution Profile) AVRCP(Audio / Video Remote Control Profile) Effective range Battery Capacity Dimension Working time Charging time Weight Standby Class 2 240mA 52x52x13mm 10 hours 2.5hours G.W. 26g (only device) Over 7 days 1.6 System requirement Bluetooth Music is bluetooth v3.0 backward compatible. So if your bluetooth device is v4.
3.Pairing the Bluetooth Music Bluetooth setup for iPhone/iPad/iPod Go to the Bluetooth manager of your iPhone/iPad/iPod and turn on the “Bluetooth” Follow the onscreen instruction on idevice. Click the pair, the Bluetooth Music will be connected. When LED will show the steady blue light after a few second, Bluetooth Music is pairing done.
Bluetooth setup for Android phone Note: Go to the Bluetooth manager of your Android phone and turn on the “Bluetooth”. Follow as below and when LED will show the steady blue light after a few second, Bluetooth Music is pairing done. If your android phone just show “Connected to phone audio” or “Connected to media audio” on screen. Then Bluetooth Music just have one function.
4.Use the Bluetooth Music 1. Start playing music on your smartphone. 2. You can play/pause music on Bluetooth Music or your smartphone. Press the control button on Bluetooth Music Play/Pause music Double press the control button on Bluetooth Music Playing the next Song And you can directly control volume on your smartphone/stereo.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
