System Instruction

Issue Department：Bedding Division Date：
2017-8-15
System Instruction
Author：
Instruction of RF5022
Edition：
1.1
Page 4 of 7
4/7
Under locked state, press and hold childlock button, red backlight of childrenlock begins to
flash,after 5s, the red backlight stops flashing, remote enters into the normal working
condition;
2.9 moving in of lumbar actuator（button 9 in figure 2）
Press and hold LUMBAR UP buton of remote , lumbar actuator moves out, stop when
released；
2.10 Reset all memory positions to default settings（button 1 and 16 in figure 2）
Pressa and hold ZG+FLAT buttons （button 1 and 16 in figure 2）for 5s, timer LED of
remote flashes, the control box reset all memory positions to default settings；
2.11 Head up（button 10 in figure 2）
Press and hold HEAD UP button of remote, head actuator moves out, stop when
released ；
2.12 Head down（button 13 in figure 2）
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released；
2.13 Foot up（button 12 in figure 2）
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
2.14 foot down（button 15 in figure 2）
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released；
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head and
foot actuators start moving;
2.15 moving out of tilt actuator（button 11 in figure 2）
Press anfd hold TILT UP button, tilt actuator moves out, stio when released;