System Instruction
Table Of Contents
- 1.1 ZG button（button 1 in figure 1）
- 1.2 AntiSnore button（button 3 in figure 1）
- 1.3 TV/PC button（button 4 in figure 1）
- 1.4 LOUNGE button（button 6 in figure 1）
- 1.5 Reset all memory positions to default settings（button 1 and 11 in figure 1）
- 1.6 Head up（button 7 in figure 1）
- 1.7 Head down（button 9 in figure 1）
- 1.8 Foot up（button 8 in figure 1）
- 1.9 foot down（button 10 in figure 1）
- 1.10 Flat（button 11 in figure 1）
- 1.11 Massage head（button 12 in figure 1）
- 1.12 Massage timer（button 13 in figure 1）
- 1.13 Massage ON/OFF（button 15 in figure 1）
- 1.14 Under bed light（button 16 in figure 1）
- 1.15 Massage Type（button 17 in figure 1）
Issue Department
：
Bedding Division
Date
：
2017-8-15
System Instruction
Author
：
Instruction of RF5017
Edition
：
1.1
Page 4 of 5
4 / 5
1.12 Massage timer（button 13 in figure 1）
If the massage motors do not work, the button is invalid, if the massage motors work, click the
button to switch the massage time, when massage time switch to 0, turn off the massage;
1.13 Massage ON/OFF（button 15 in figure 1）
Click Massage ON/OFF button, if the massage motors are on, then it turns off massage
motors,if massage motors are off, then it turns on the massage motors;
1.14 Under bed light（button 16 in figure 1）
Click the under bed light button, the under bed light switch its on/off state; After the under bed
light opens, if do not manually close, it will automatically turn off after 5 minutes;
1.15 Massage Type（button 17 in figure 1）
Click massage type button, to switch the massage mode og massage motors, massage mode
switches among type0type1type2type3type0; this button can only switch the massage
mode, it can not open massage motors；