System Instruction

Issue Department
：
Bedding Division
Date
：
2017-8-15
System Instruction
Author
：
Instruction of RF5017
Edition
：
1.1
Page 3 of 5
3 / 5
1.5 Reset all memory positions to default settings（button 1 and 11 in figure 1）
Pressa and hold ZG+F L AT buttons（button 1 and 16 in figure 2）for 5s, timer LED of
remote flashes, the control box reset all memory positions to default settings；
1.6 Head up（button 7 in figure 1）
Press and hold HEAD UP button of remote, head actuator moves out, stop when
released；
1.7 Head down（button 9 in figure 1）
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released；
1.8 Foot up（button 8 in figure 1）
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
1.9 foot down（button 10 in figure 1）
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released；
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head and
foot actuators start moving;
1.10 Flat（button 11 in figure 1）
Click F L AT button, the bed goes flat, stop when click any button during the process of going
flat；
1.11 Massage head（button 12 in figure 1）
Click MASSAGE HEAD button, head massage motor switches massage intensity, massage
intensityswitches among 0-1-2-3；