System Instruction
Table Of Contents
- 1.1 ZG button（button 1 in figure 1）
- 1.2 AntiSnore button（button 3 in figure 1）
- 1.3 TV/PC button（button 4 in figure 1）
- 1.4 LOUNGE button（button 6 in figure 1）
- 1.5 Reset all memory positions to default settings（button 1 and 11 in figure 1）
- 1.6 Head up（button 7 in figure 1）
- 1.7 Head down（button 9 in figure 1）
- 1.8 Foot up（button 8 in figure 1）
- 1.9 foot down（button 10 in figure 1）
- 1.10 Flat（button 11 in figure 1）
- 1.11 Massage head（button 12 in figure 1）
- 1.12 Massage timer（button 13 in figure 1）
- 1.13 Massage ON/OFF（button 15 in figure 1）
- 1.14 Under bed light（button 16 in figure 1）
- 1.15 Massage Type（button 17 in figure 1）
Issue Department
：
Bedding Division
Date
：
2017-8-15
System Instruction
Author
：
Instruction of RF5017
Edition
：
1.1
Page 2 of 5
2 / 5
1.1 ZG button（button 1 in figure 1）
Click the ZG button, the actuator moves to ZG position, stop when click any button during the
movement;
Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records
current position as ZG position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.2 AntiSnore button（button 3 in figure 1）
Click AntiSnore button, actuators move to AntiSnore position, stop when click any button
during movement；
Press and hold
AntiSnore button for 5s, timer LED of remote flashes, the control box records
current position as
AntiSnore position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.3 TV/PC button（button 4 in figure 1）
Click TV/PC button, actuators move to TV/PC position, stop when click any button during
movement；
Press and hold
TV/PC button for 5s, timer LED of remote flashes, the control box records
current position as
TV/PC position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.4 LOUNGE button（button 6 in figure 1）
Click LOUNGE button, actuators move to LOUNGE position, stop when click any button
during movement；
Press and hold
LOUNGE button for 5s, timer LED of remote flashes, the control box records
current position as
LOUNGE position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;