User's Manual

Technical
Documentation
Date: 15.05.2020
User Manual for Cinema
seating system Kit
Technical Documentation / Creator: Rev. 1 Page 2/3
This document is valid without signature!
 Installation schema
The typical installation is composed of several seats each one equipped with a Cinema Seating
controlbox and at least one remote wireless control.
Every controlbox can manage the seat motors through the local hand control and can receive
remote commands wirelessly.
All the controlboxes at the same time can be controlled by a remote (Spaceship JLDK.21.xxxx).
The remote can simultaneously: open/close/pair all the chairs present on the same room.
Different remotes must be used for different room to avoid the interaction between the chairs.
 Radio channel used on communication
The communication happens by sending and receiving radio packets on a specific radio
channel defined during the installation of the screen. The radio parameters are compliants with
the FCC/IC rules.
Every controlbox must be paired before use. The pairing procedure complain some packet
sending one way from remote to the controlboxes that are already in pairing mode.
The pairing mode ( see chapters below ) put the devices into a special learning mode using a
common radio parameters. When the pairing procedure ends all the devices and the remote will
have a new radio channel and new addresses configured for communication.