User Instructions

Issue department
：
R&D Division
Date
：
2019-11-17
Product Function
instruction
Author
：
Jarek
No：CB3433A
CB.34.33.01
Version： 1.0
Page 3 of 5
3
3.3.LUMBAR ACTUATOR
Connect to foot actuator,control by remote single:
Click Lumber up button，foot actuator moves out，stop when released；
Click Lumber down button，foot actuator moves in，stop when released；
This function takes effect only by pressing the corresponding button on the remote.
3.4.HEAD1 VIBRATION & HEAD2 VIBRATION
Connect to head massage,control by remote:
Click head massage + button,head massage strengthens by one level;
Click head massage - button,head massage weakenby one level;
This function takes effect only by pressing the corresponding button on the remote.
3.5.FOOT VIBRATION
Connect to Foot massage,control by remote:
Click FOOT massage + button,head massage strengthens by one level;
Click FOOT massage - button,head massage weakenby one level;
This function takes effect only by pressing the corresponding button on the remote.
3.6.Power LED & PAIRING LED
Power supply for control box, PAIRING LED of control box is blue, POWER LED is green。
3.7.PAIR & RESET button Function
Pair Function：
Power supply for control box,Pair LED lights to blue，the control box enters into mode of code paring；
Press and hold the paring button of Remote, the backlight of paring LED flashes, the backlight of remote flashes,
the remote enters into mode of code paring;
The backlight of paring LED of remote stops flashing, and the paring led of control box turns off, it indicates that
the code paring is successful;