Product Overview

8
ORDERING INFORMATION
1-800-435-7213
©2021 ELCO – REV. B
ORDERING INFORMATION
Dril-Flex
Cat. No.
Description
(Diameter- TPI x
Nominal Length)
Point Type Finish
Maximum
Load-Bearing
Length
1
(in.)
Minimum
Protrusion
Length
2
Nominal Head
Diameter
3
(in.)
Nominal Head
Height
4
(in.)
Qty / Carton
#10 Diameter, 5/16" Hex Washer Head
EAF430 #10 - 16 x 3/4" #3 Stalgard SUB 0.250 1/2" 0.400 0.14 6,000
EAF460 #10 - 16 x 1-1/2" #3 Stalgard SUB 1.000 1/2" 0.400 0.14 2,500
EAF470 #10 - 16 x 2" #3 Stalgard SUB 1.500 1/2" 0.415 0.17 2,000
EAF480 #10 - 16 x 2-1/2" #3 Stalgard SUB 2.000 1/2" 0.400 0.14 1,500
#10 Diameter, #2 Phillips Pan Head
EDX445 #10 - 16 x 3/4" #2 Stalgard 0.344 13/32" 0.365 0.13 6,000
#10 Diameter, #2 Phillips Wafer Head
EBL530 #10 - 24 x 1-1/4" #3 Stalgard 0.781 15/32" 0.470 0.05 5,000
#12 Diameter, 5/16" Hex Washer Head
EAF621 #12 - 14 x 7/8" #3 Stalgard SUB 0.375 1/2" 0.415 0.18 5,000
EAF641 #12 - 14 x 1" #3 Stalgard SUB 0.500 1/2" 0.415 0.18 4,000
EAF661 #12 - 14 x 1-1/4" #3 Stalgard SUB 0.750 1/2" 0.415 0.18 2,500
EAF681 #12 - 14 x 1-1/2" #3 Stalgard SUB 1.000 1/2" 0.415 0.18 2,500
EAF755 #12 - 24 x 1-3/4" #5 Stalgard SUB 0.813 15/16" 0.415 0.18 2,500
EAF690 #12 - 14 x 2" #3 Stalgard SUB 1.500 1/2" 0.415 0.18 2,000
EAF715 #12 - 14 x 3" #2 Stalgard SUB 2.375 5/8" 0.500 0.19 1,000
#12 Diameter, #3 Phillips Undercut Flat Head
EBL215 #12 - 14 x 1" #3 Stalgard 0.500 1/2" 0.415 0.09 4,000
EBL220 #12 - 14 x 1-1/4" #3 Stalgard 0.750 1/2" 0.415 0.09 3,000
EBL223 #12 - 14 x 1-1/2" #3 Stalgard 1.000 1/2" 0.415 0.09 2,500
1/4" Diameter, 3/8" Hex Washer Head
EAF816 1/4" - 14 x 1" #3 Stalgard SUB 0.438 9/16" 0.500 0.23 3,000
EAF865 1/4" - 20 x 1-1/8" #4 Stalgard SUB 0.438 11/16" 0.500 0.23 2,500
EAF841 1/4" - 14 x 1-1/2" #3 Stalgard SUB 0.938 9/16" 0.500 0.23 2,000
EAF876 1/4" - 20 x 1-1/2" #4 Stalgard SUB 0.813 11/16" 0.500 0.23 2,000
EAF888 1/4" - 20 x 1-3/4" #5 Stalgard SUB 0.813 15/16" 0.500 0.23 1,000
EAF846 1/4" - 14 x 2" #3 Stalgard SUB 1.438 9/16" 0.500 0.23 1,500
EAF886 1/4" - 20 x 2" #4 Stalgard SUB 1.313 11/16" 0.500 0.23 1,500
EAF890 1/4" - 20 x 2-1/2" #4 Stalgard SUB 1.813 11/16" 0.500 0.23 1,000
EAF900
[5]
1/4" - 20 x 3-3/8" #4 Stalgard SUB 2.625 3/4" 0.500 0.23 500
EAF910
[5]
1/4" - 20 x 4" #4 Stalgard SUB 3.250 3/4" 0.500 0.23 500
1/4" Diameter, #3 Phillips Undercut Flat Head
EBL330
[5]
1/4" - 20 x 3" #4 Stalgard 2.250 3/4" 0.460 0.10 500
EBL340
[5]
1/4" - 20 x 4" #4 Stalgard 3.250 3/4" 0.460 0.10 500
5/16" Diameter, 3/8" Hex Washer Head
EAF940 5/16" - 18 x 1-1/2" #3 Stalgard SUB 0.813 11/16" 0.600 0.27 1,000
EAF960 5/16" - 24 x 1-1/2" #4 Stalgard SUB 0.750 3/4" 0.600 0.27 1,000
EAF970 5/16" - 24 x 2" #4 Stalgard SUB 1.250 3/4" 0.600 0.27 1,000
1. The Maximum Load Bearing Length is calculated by subtracting the Minimum Protrusion Length from the Nominal Length of the fastener.
2. Minimum Protrusion Length is the length that allows the higher hardness tip and lead threads to protrude out of the back side of the supporting material.
3. Nominal head diameter is the diameter of the integral washer on hex washer head fasteners.
4. Nominal head height includes the thickness of the integral washer on hex washer head fasteners.
5. Partially Threaded Fastener with a thread length of 2.00".
Load Bearing Area
Hex Washer Head Pan Head Undercut Flat Head Wafer head
DRIL-FLEX
®