Use and Care Manual

ENGLISH
6
BATTERY SET UP GUIDE
1
Open batterybox.
2
Connect the red wire to the
"+" (positive) terminal and
the black wire to the "-"
(negative) terminal.
3
Close battery box
4
Connect the engine start
connector to the battery box
5
Connect the bullet connector
to the engine startconnector.
6
Complete battery
boxassembly
QUICK START GUIDE
1
Connect Garden Hose to Pump
Thread the garden hose to the
pumpinlet.
2
Connect High Pressure Hose
to Pump
Connect the high pressure hose to the
pumpoutlet.
3
Connect High Pressure Hose
to Spray Gun
Thread the other end of the high
pressure hose to the spray gun.
4
Connect Spray Wand to
SprayGun
Thread the spray wand into the end of
the spraygun.
5
Connect QC Nozzles to
SprayWand
Pull quick connect coupler back and
insert nozzle. Release quick connect
coupler and twist nozzle to make sure
it is secure incoupler.
6
Turn Water Faucet
CompletelyOn
Do not run the unit without water
supply connected and turned on. Use
Cold WaterOnly.
NOTE: Unit equipped with water
sensing device, shuts down
machine if the presence of water is
notdetected.