Full Product Manual

5
ENGLISH
4
Connect Spray Wand to
SprayGun
Thread the spray wand into the end of
the spraygun.
5
Connect QC Nozzles to
SprayWand
Pull quick connect coupler back and
insert nozzle. Release quick connect
coupler and twist nozzle to make sure
it is secure incoupler.
6
Turn Water Faucet
CompletelyOn
Do not run the unit without water
supply connected and turned on. Use
Cold WaterOnly.
7
Release Air from System
Release all air from pump and high
pressure hose by depressing trigger
until a steady stream of water is
present. Approximately 30seconds.
8
Start engine. See Engine Owner’s Manual for correct procedure.
30 S

WARNING: This Guide is not a substitute for reading the operator’s manual. User must read and understand operator’s
manual before using thisproduct.