Use and Care Manual
 2. Pull pusher (E) back and lock a the base of the magazine.
 3. Slide fasteners out of the magazine.
 4. If nail is jammed between the driver and nose casting force driver 
blade back to the top using a 1/4" (6.4 mm) punch and hammer. 
When the nail is released it will fall free or can be removed 
usingpliers.
E
FIG. 8
K
 5. If nail still can not be removed, remove the magazine:
    a. Remove screw (K).
    b. Remove magazine.
    c. Remove bent nail.
    d. Reassemble in reverse order.
NOTE: Should nails continue to jam frequently in nosepiece, have 
tool serviced by an authorized 
DeWALT
 service center.
Daily Maintenance Chart
ACTION Lubricate tool with 5-10 drops of D
e
WALT Pneumatic 
Tool Oil
WHY Prevents failure of o-rings
HOW Insert drops into air fitting on end cap of tool
ACTION Drain compressor tanks and hoses daily
WHY Prevents accumulation of moisture in compressor and 
nailer
HOW Open petcocks or other drain valves on compressor 
tanks. Allow any accumulated water to drain from 
hoses
ACTION Clean magazine, pusher, and contact trip mechanism
WHY Permits smooth operation, reduces wear, and 
prevents jams
HOW Blow clean with compressed air. The use of oils or 
solvents is not recommended as they tend to attract 
debris
ACTION Before each use, check to ensure all screws, nuts and 
fasteners are tight and undamaged
WHY Prevents jams, leaks and premature failure of tool 
parts
HOW Tighten loose screws or other fasteners using the 
appropriate hex wrench or screwdriver
Cleaning
 WARNING: Blow dirt and dust out of all air vents with clean, dry air 
at least once a week. To minimize the risk of eye injury, always wear 
ANSI Z87.1 approved eye protection when performing this.
 WARNING: Never use solvents or other harsh chemicals for 
cleaning the non-metallic parts of the tool. These chemicals may 
weaken the plastic materials used in these parts. Use a cloth 
dampened only with water and mild soap. Never let any liquid get 
inside the tool; never immerse any part of the tool into a liquid.
Repairs
WARNING: To reduce the risk of serious personal injury, remove 
nails from magazine before making any adjustments or servicing this 
tool.
English
10










