® DW700
16 4 1 3 2 5 6 7 8 9 10 11 15 A1 14 13 12 24 18 17 23 21 19 A2 22 20
25 26 27 28 29 26 27 25 31 30 32 30 A3 26 A4 35 36 16 34 17 31 33 A5 B 8 37 38 39 39 41 40 42 15 D C 44 43 6 5 48 45 2 21 47 46 7 E F
5 13 51 49 50 G2 G1 45 54 H 12 11 53 52 J1 20 56 57 58 J2 59 55 J3 2 45° 1 K L
1 2 3 60 M N O P A Q1 Q2
ENGLISH CROSS-CUT MITRE SAW DW700 Congratulations! EC-Declaration of conformity You have chosen a DEWALT product. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional users.
ENGLISH Safety instructions When using Power Tools, always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the following safety instructions before attempting to operate this product. Keep these instructions in a safe place! General 1 Keep work area clean Cluttered areas and benches can cause accidents. 2 Consider work area environment Do not expose Power Tools to humidity. Keep work area well lit.
ENGLISH Package contents The package contains: 1 Partly assembled machine 1 Allen key 1 Pin spanner 1 216 mm TCT saw blade 2 Coach bolts 1 Fence insert (with 2 screws) 2 Dust extraction nozzles 1 Instruction manual 1 Exploded drawing • Check for damage to the tool, parts or accessories which may have occurred during transport. • Take the time to thoroughly read and understand this manual prior to operation. • Remove the saw from the packaging material carefully. Description (fig.
ENGLISH Assembly Prior to assembly always unplug the tool. The motor and guards are already assembled onto the base. Dust extraction DE7777 (option) (fig. B) • Fit the hoses (34) to the nozzles (16) and (17). • Connect the hoses to the 3-way connector (36) using the adaptors (35) and plug off the third hole. • Whenever possible, connect a dust extraction device designed in accordance with the relevant regulations regarding dust emission. Fitting the fence insert (fig.
ENGLISH Instructions for use • Always observe the safety instructions and applicable regulations. The attention of UK users is drawn to the “woodworking machines regulations 1974” and any subsequent amendments. • Ensure the material to be sawn is firmly secured in place. • Apply only a gentle pressure to the tool and do not exert side pressure on the saw blade. • Avoid overloading. Prior to operation: • Install the appropriate saw blade. Do not use excessively worn blades.
ENGLISH • Follow the horizontal intersecting line to either side to get the mitre angle setting on the saw (23°). • Likewise follow the vertical intersecting line to the top or bottom to get the bevel angle setting on the saw (40°). • Always try cuts on a few scrap pieces of wood to verify the settings on the saw.
ENGLISH Range of saw blades available (recommended blades) Tungsten carbide tipped (TCT) Negative tooth rake Negative rake flat-topped teeth GUARANTEE Application Diameter Teeth For wood, boards thick-walled plastic profiles For high-quality panels finer cut), thin-walled plastic profiles For thin-walled plastic profiles (e.g. window blind slats, cable ducts) 216 24 216 48 216 60 Consult your dealer for further information on the appropriate accessories. Transporting (fig.
Belgique et Luxembourg België en Luxemburg DEWALT Weihoek 1, Nossegem 1930 Zaventem-Zuid Danmark DEWALT Hejrevang 26 B 3450 Allerød Tlf: Fax: 70 20 15 10 48 14 13 99 Deutschland DEWALT Richard-Klinger-Straße 65510 Idstein Tel: Fax: 06 12 62 16 061 26 21 24 40 EÏÏ¿˜ DEWALT §ÂˆÊ ™˘ÁÁÚÔ‡ 154 176 71 K·ÏÏÈı¤·, ∞ı‹Ó· España DEWALT Ctra de Acceso a Roda de Barà, km 0,7, 43883 Roda de Barà, Tarragona Tel: Fax: Fax: 977 29 71 00 977 29 71 38 977 29 71 19 France DEWALT Le Paisy BP 21, 69571 Dardilly
