Instruction manual

ELECTRIC POWER TOOLS
50
711
No-Load Capacity Capacity
Order No. Mfg. No. Speed (rpm) Steel (in) Wood (in)
5029.00289 D13 550 1/2 1-5/8
1/2" Reversible Drill
• Powerful 6.2 amp motor
• Industrial chuck designed for heavy-duty
use and maintenance-free
operation
• 3-position side handle and
removeable 2-position rear D-
handle for greater control and balance
• Auto-stop carbon brushes protect arma-
ture and extend tool life
• Includes: drill chuck 950275, chuck key
930515, side handle 981828
Order No. Mfg. No. Amps Overall Length (in)
5029.00291 DV20VBP3 6.8 13-3/8
3/4" Reversible Hammer Drill
Variable Speed
• Exclusive 2-speed
synchromesh trans-
mission allows speed shift
without stopping operation
• Easy to select lever method for
easy selection of impact drilling or
drilling only modes
• Includes: side handle 316279, stopper 303709, plastic
carrying case 310904
Impact
Order No. Mfg. No. Amps Energy Core Bit (in) bpm
5029.00297 DH24PB 5.7 1.5 ft-lb 2 0-4400
Rotary Hammer
2 Mode
• 5.7 amp motor
• Lightweight: 5.1 lb
• No-load speed: 0-1050 rpm
• Modes:hammer/drill and drill only
• Includes: depth gauge 303709, plastic carrying case
307786, side handle 303659
Impact
Order No. Mfg. No. Amps Energy bpm
5029.00300 DH40FA 8.7 5.9 ft-lb 2800
5029.00303 DH40FB 8.7 1.9-5.9 ft-lb 1400-2800
Spline Shank
• One-touch lever action for quick change
over from ‘rotation + hammer’ to ‘hammer
only’
• Comfortable cushion-grip handles reduce vibration
• Auto-stop carbon brushes protect armature
• No-load speed: (DH40FA) 400 rpm, (DH40FB) 180-360
rpm
• Includes: plastic carrying case 313097, stopper 971786,
hex wrench 4 mm 944458, hex wrench 5 mm 944459,
grease 981840, dust cover 993245
Max Shank
• Sealed grease
system
• One-touch mode selection lever
• No-load speed: (DH40MA) 360 rpm,
(DH40MB) 180-360 rpm
• Includes: plastic carrying case 313097, stop-
per 971786, hex wrench 4 mm 944458, hex wrench 5 mm
944459, grease 981840, dust cover 993245
Impact
Order No. Mfg. No. Amps Energy (ft-lb) bpm
5029.00306 DH40MA 8.7 5.9 2800
5029.00309 DH40MB 8.7 1.5-5.9 1400-2800
Impact Core
Order No. Mfg. No. Amps Energy Bit (in) bpm
5029.00294 DH24PC 5.7 1.5 ft-lb 2 0-4400
SDS-Plus
15/16" Rotary Hammer
3 Modes
Reversible Variable Speed
• New more powerful 5.7 amp motor
• Modes: hammer/drill, hammer only, drill only
• Variable lock mechanism for easy adjustment of working
angle of chisels
• No-load speed: 0-1350 rpm
• Includes: depth gauge 303709, plastic carrying case
307786, side handle 303659
1-9/16" Rotary
Hammer
• Trigger speed control
• All ball and roller bearings
• Removeable side handle
• For percussion carbide-bit drilling in concrete
and masonry or drilling without hammering in
wood or metal
• Reversing
• Cushion grip handle
• 7.5 amps
• 13" in length
• 120 Volts (AC only)
• RPM: Low 0-1,350; High 0-3,200
• Blows per minute: low 0-22,000; High 0-52000
Order No. Mfg. No. RPM Blows / min
5029.00283 5378-20 Low 0-1,350 Low 0-22,000
High 0-3,200 High 0-52,000
5029.00286 5378-2 With impact resistant use case
1/2" Hammer Drill Kit
Keyed Chuck