Technical data

8
E N G L I S H
yrettab fo epyt eno rof elbatius si taht regrahc A
pack may create a risk of fire when used with
another battery pack.
c Use power tools only with speciì cally
designated battery packs.
Use of any other battery packs may create a risk
of injury and fire.
d When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a
connection from one terminal to another.
yam rehtegot slanimret yrettab eht gnitrohS
cause burns or a fire.
e Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help.
esuac yam yrettab eht morf detceje diuqiL
irritation or burns.
6 Service
a Have your power tool serviced by a qualified
repair person using only identical
replacement parts.
loot rewop eht fo ytefas eht taht erusne lliw sihT
is maintained.
•
•
Check for damage to the tool, parts or
accessories which may have occurred during
transport.
Take the time to thoroughly read and
understand this manual prior to operation.
)A .gif( noitpircseD
1 On/off switch
2 Lock-on button
3 Speed control dial
4 Sawdust blower
5 Screw
6 Finger guard
7 Blade holder
8 Guide roller
9 Shoe
10 Pendulum stroke selector
Electrical safety
eno rof dengised neeb sah rotom cirtcele ehT
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D
E ni detalusni elbuod si loot TLAW
accordance with EN 60745; therefore
no earth wire is required.
elbac noisnetxe na gnisU
devorppa na esu ,deriuqer si elbac noisnetxe na fI
extension cable suitable for the power input of this
machine (see technical data). The minimum
conductor size is 1.5 mm
2
. The cable has to have a
rubber jacket and a grounding conductor.
elbac eht dniwnu syawla ,leer elbac a gnisu nehW
completely.
Assembly and adjustment
Prior to assembly and adjustment
always unplug the tool.
)B .gif( edalb was a gnivomer dna gnittiF
serusne metsys egnahcxe edalbehT
easy changing of saw blades.
•
Your jigsaw DW341(K) has been designed for
professional cutting of wood, steel, aluminium,
plastic and ceramic material.
)C .gif( elgna leveb eht gnitteS
dna HL fo gnittuc swolla )9( eohs elbatsujda ehT
RH bevel angles up to 45˚. The bevel scale has
preset positions at 0˚ and 45˚.
Slacken the screws (11) using the supplied Torx
wrench.
Slide the shoe (9) toward the saw blade.
Tilt the shoe and set the desired bevel angle
using the scale.
Tighten the screws.
•
•
•
•
•
•
keyed
Release the two fastening screws (5), open
blade holder (7),pull the blade out of the
holder.
Insert blade into blade holder (7), guiding the
back of the blade into the groove of the guide
roller (8).
Lock the fastening screws to fix the blade (5)