Technical data

10
E N G L I S H
Sawing in wood using a pilot hole
If necessary, draw a cutting line.
Drill a hole ( min. 12 mm) and introduce the
saw blade.
Switch the tool on.
Follow the line.
For cutting perfectly round shapes, install the
trammel bar (optional) and set it to the required
radius (fig. H).
)I & A .gif( egde gnitcejorp a ot pu gniwaS
Using a conventional blade, cut up to the
projected edge.
Finish off the cut using a flush cutting blade.
latem ni gniwaS
Mount an appropriate saw blade.
Proceed as described above.
•
•
•
•
•
•
•
•
Use a cooling lubricant (cutting oil) to
prevent overheating of the saw blade or
the workpiece.
ecnanetniaM
D ruoY E ot dengised neeb sah loot rewop TLAW
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular
cleaning.
Lubricating the guide roller (fig. B)
• Apply a drop of oil to the guide roller (8) at regular
intervals to prevent jamming.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Protecting the environment
Service Information
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your DEWALT product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces the
demand for raw materials.
DEWALT offers a full network of company-owned
and authorized service locations throughout Asia.
All DEWALT Service Centers are staffed with
trained perso nne l to provide cu sto mer s with
efficient and reliable power tool service. Wether
you need technical advice, repair, or genuine
factory replacement parts, contact the DEWALT
location nearest to you.
Notes
- DEWALT's policy is one of continuous
improvement to our products and, as such, we
reserve the right to change product specifications
without prior notice.
- Standard equipment and accessories may vary
by country.
- Product specifications may differ by country.
- Complete product range may not be available in
all countries. Contact your local DEWALT dealers
for range availability.