® DW340K
5 4 2 3 1 3 A
4 B C 1 D E
ENGLISH HEATGUN DW340K Congratulations! EC-Declaration of conformity You have chosen a DEWALT Power Tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional Power Tool users. Table of contents Technical data EC-Declaration of conformity Safety instructions Package contents Description Electrical safety Mains plug replacement (U.K.
ENGLISH Safety instructions When using Power Tools, always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the following safety instructions before attempting to operate this product. Keep these instructions in a safe place! General 1 Keep work area clean Cluttered areas and benches can cause accidents. 2 Consider work area environment Do not expose Power Tools to humidity. Keep work area well lit.
ENGLISH Check for misalignment and seizure of moving parts, breakage of parts and any other conditions that may affect its operation. Have damaged guards or other defective parts repaired or replaced as instructed. Do not use the tool if the switch is defective. Have the switch replaced by an authorized DEWALT repair agent. 20 Have your tool repaired by an authorized DEWALT repair agent This Power Tool is in accordance with the relevant safety regulations.
ENGLISH Electrical safety Using an extension cable The electric motor has been designed for one voltage only. Always check that the power supply corresponds to the voltage on the rating plate. If an extension cable is required, use an approved 3-core extension cable suitable for the power input of this tool (see technical data). The minimum conductor size is 1.5 mm2. When using a cable reel, always unwind the cable completely. Also refer to the table below.
ENGLISH Medium (2nd sector) • Welding plastics • Bending plastic pipes and sheets • Loosening rusted or tightly fastened nuts and bolts High (4th sector) • Removing paint and lacquer • Soldering plumbing joints • If you are not sure about the correct setting, start with a low temperature setting and gradually increase the temperature until you achieve optimum results. Mounting the correct accessory This tool is supplied with a set of accessories for different applications.
ENGLISH • Switch the tool off and let it cool down for at least 30 minutes. GUARANTEE • 30 DAY NO RISK SATISFACTION GUARANTEE • Consult your dealer for further information on the appropriate accessories. Maintenance Your DEWALT Power Tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. Lubrication Your power tool requires no additional lubrication.
