Specifications

174
KASS
INDUSTR
IAL SUPPLY CORP.
Headquarters
BRONX, NEW YORK
Ph: 718-299-6060 • Fx: 718-299-1593
Toll Free: 800-255-0910
ANCHORING
POWER TOOLS
& ACCESSORIES
FASTENERS
CONTRACTOR
SUPPLY
ADHESIVES
& SEALANTS
DRYWALL SUPPLY
& HAND TOOLS
AIR & GAS
NAILERS
1680-20
DRILLS & DRILL PRESS
1675-6
3002-1 / 3102-6 / 3107-6
ALL MODELS INCLUDE
IMPACT RESISTANT
CARRYING CASE
RIGHT ANGLE DRILL KITS
• 1/2” trigger speed control reversing
• 7 AMP motor
• Helical cut, heat treated gears
• All ball and roller bearings
• Durable, glass reinforced nylon handles
• Steel hardened shafts
• Quadruple gear train
• Use with up to 4-5/8” selfeed bits on models 3107-6 & 3102-6 only
• Head and handle swivel 360° - can be locked tight in any position - allow
5-1/2” for right angle drill head and chuck
• Includes: 9/16” open end wrench, 3/16” socket wrench, chuck remover bar,
side handle & impact resistant case on all models, model 3107-6 also includes: 8’ 3-wire Quik-Lok
®
cord set
Capacity No Load RPM RPM W/RAD
Cat. No. Steel Volts AC Only Amps Drill Only Includes Drill No. Low Side High Side
3002-1 ELECTRICIANS’ 1/2” 120 7.0 0-600 1001-1 0-400 0-900
3102-6 PLUMBERS’ 1/2” 120 7.0 500 1101-1 335 750
3107-6 VARIABLE SPEED 1/2” 120 7.0 0-500 1107-6 0-335 0-750
HEAVY-DUTY
HOLE-HAWG
®
DRILL
• 7.5 AMP motor
• 2 position pipe handle
• 3 position spade handle
• Two speed gear shift
• External brush caps
• All ball and roller bearings
• Power and torque, reversing, compact design
for drilling between studs and joists
• Can power up to 4-5/8” selfeed bit in low speed
and drill up to 1-3/8” selfeed bit in high speed
Capacity
Cat. In Steel RPM Gear Length
No. (Inches) Low/High Train (Inches)
1675-6 1/2 300/1,200 Triple 6-1/2
HEAVY-DUTY
SUPER-HAWG
®
DRILL
• 13 AMP motor
• Low speed clutch
• Rotating handle -
Roto-Lok™ 90° left/right
rotation for most
comfortable grip position
• Cushion grips provide more
comfortable gripping
• Easy access brus covers make it simple to
replace brushes
Capacity
Cat. In Steel RPM Gear Length
No. (Inches) Low/High Train (Inches)
1680-20 1/2 1750/450 Triple 22
4270-20
HEAVY-DUTY - COMPACT
ELECTROMAGNETIC DRILL PRESS
A great choice for remote drilling in metal. The entire tool weighs just 26-1/2 pounds and has a
comfortable carrying handle well positioned for balance, with cutter wrenches stored on-board. This
is a very portable machine. However, power was not sacriced for portability. This drill press includes
a very powerful 1.1 maximum horsepower, 9.0 amp motor. It can drill up to 1-1/2 in. diameter holes
through 2 in. thick steel with annular cutters, or 1/2 in. diameter holes 4-1/4 in. deep with twist drill
bits. The tool is setup to accept standard 3/4 in. shank cutters. The strong two-coil magnet provides
2,300 lbs. of deadlift force on 1 in. thick steel. The simple two-button control panel is located on
the back, away from feed handle obstruction. The feed handle can be conveniently relocated to the
opposite side without the use of tools.
• Includes: lubricant spray bottle, nylon safety strap and two hex wrenches
Cat. No. AC Only Amps RPM Length Height
4270-20 120 9.0 450 9-3/8” 15-1/3”