Specifications

165
MAMARONECK
New York
Ph: 914-777-3245
Fx: 914-777-3875
ISLANDIA
Long Island
Ph: 631-234-0740
Fx: 631-234-0686
BENSALEM
Pennsylvania
Ph: 215-244-1545
Fx: 215-244-1082
POWER TOOLS
& ACCESSORIES
ANCHORING
POWER TOOLS
& ACCESSORIES
FASTENERS
CONTRACTOR
SUPPLY
ADHESIVES
& SEALANTS
DRYWALL SUPPLY
& HAND TOOLS
AIR & GAS
NAILERS
1
1
/
8
” SDS-plus
®
ROTARY HAMMER
• 7.5 amp motor; 0-850 RPM; 0-3,900 BPM
• 3 modes of operation, rotation only, rotary hammer and hammer only
mode
• Vario-Lock™ positioning rotates and locks chisel into 36 different posi-
tions
• Integral clutch helps minimize recoil in high-torque situations
• Padded rear handle absorbs shock for operator comfort
• SDS-plus
®
bit system - tool-less bit changes, plus secure bit holding
• Includes: Carrying Case, 360° Auxiliary Handle & Depth Gauge
1
3
/
4
” SDS-max
®
ROTARY HAMMER
• 13.0 amp motor; 120-250 RPM; 1,000-2,400 BPM
• Constant-Response™ circuitry - monitors and adjusts power to maintain
desired RPM
• Dual-function control quickly converts from hammer only to hammer
with rotation
• Vario-Lock™ positioning rotates and locks chisel into 36 different posi-
tions
• Integral clutch helps minimize recoil in high-torque situations
• Padded rear handle - absorbs shock for operator comfort
•
SDS-max
®
bit system - Tool-less bit changes, with automatic bit locking
• Includes: 360° Auxiliary Handle & Carrying Case
1
1
/
8
” SDS-plus
®
ROTARY HAMMER
• 7.8 amp motor; 300-700 RPM; 1,650-3,900 BPM
•
Constant-Response
™
Circuitry - Provides soft-start and constantly monitors
and adjust power to maintain desired RPM
• Variable speed dial - For accurate bit starting and controlled chipping
applications
• SDS-plus
®
bit system - Tool-less bit changes, with automatic bit locking,
dust protection and maximum impact energy transfer rate
• 3 Modes of operation - Rotation only, rotary hammer and hammer only
mode
•
Includes: 360° Auxiliary Handle, Depth Gauge & Carrying Case
11236VS
11235EVS
SDS-PLUS
®
HAMMER
STEEL CHISELS
FOR USE WITH HAMMERS WITH
HAMMER ONLY MODE CAPABILITY OR CHIPPING ADAPTER
Cat. No. Description
HS1415 Point - 10” L.
HS1420 Chisel - 3/4” x 10” L.
HS1425 Wide Chisel - 1-1/2” x 10” L.
1/2” CAPACITY CHUCK
WITH INTEGRAL SDS SHANK
USE FOR STRAIGHT SHANK HAMMER DRILL BITS
FOR ALL SDS HAMMERS
Cat. No. Description
1 681 571 014 Chuck and Key
1 610 508 015 Replacement Dust Boot
CRK005 Replacement Chuck Key
ROTARY HAMMER
ACCESSORIES
11222EVS
ROTARY HAMMERS & ACCESSORIES