Specifications

162
KASS
INDUSTR
IAL SUPPLY CORP.
Headquarters
BRONX, NEW YORK
Ph: 718-299-6060 • Fx: 718-299-1593
Toll Free: 800-255-0910
ANCHORING
POWER TOOLS
& ACCESSORIES
FASTENERS
CONTRACTOR
SUPPLY
ADHESIVES
& SEALANTS
DRYWALL SUPPLY
& HAND TOOLS
AIR & GAS
NAILERS
Unishear
®
16 GAUGE SHEAR
• 4.2 amp motor; 5,000 SPM
• Clear view of cut line enables
accurate
pattern cutting
• Compact & well balanced for
increased control and more
maneuverability
• Steel deector protects hands
from ying metal particles
• Easy blade adjustment
• Convenient slide switch with lock-on for operator comfort
during long demanding jobs
• 4 sharp cutting edges - upper & lower blades rotate at 90° intervals
providing 4 times standard blade life
• Includes: Upper/Lower Blade Set, Feeler Gauge, 3mm Allen
Wrench & Steel Deector
10 GAUGE SHEAR
• 8.6 amp motor; 1,770 SPM
• Two-handed control – for heavy
cutting jobs
• Top handle with large rocker switch
• Low vibration – for operator comfort
• Visible blade – allows precise cutting
• Perfect for industrial maintenance
departments and light structural
fabrication shops
• Includes: Angled Gauge, Feeler
Gauge, Turning Pin, 3mm & 5mm
Allen Wrenches, 10mm Open End
Wrench, Lower Blade, Upper Blade & Replacement Upper and
Lower Blades
14 GAUGE SHEAR
• 4.6 amp motor; 2,400 SPM
• Planetary gear drive -
more power per pound
• Lightweight & well balanced for
excellent control
• Low vibration for
operator comfort
• Visible blade allows
precise pattern cutting
• Easy blade adjustment when
switching material thickness
• Upper blade is double-edged - when rst edge is worn,
simply reverse blade
• Mushroom top handle for extra control under heavy cutting loads
easily removed for cutting in conned areas
• Includes: Upper/Lower Blade Set & 5mm Allen Wrench
8 GAUGE SHEAR
• 9.2 amp motor; 1,250 SPM
• Excellent for high alloy steel cutting
• Visible blade - allows precise cutting
• Top handle with large rocker switch
• Low vibration for
operator comfort
• Auxiliary handle mounts on either
side - for right or left-handers
• Ideal tool for structural fabrication
shops as well as storage tank and
rolling stock manufacturers
• Includes: Angled Gauge, Feeler
Gauge, Turning Pin, Auxiliary
Handle, 3mm & 5mm Allen Wrenches, 10mm Open End
Wrench, Lower Blade, Upper Blade & Replacement Upper and
Lower Blades
14 GAUGE NIBBLER
• 4.6 amp motor; 2,400 SPM
• Burr-free edges – no nishing
• Corrugated, trapezoidal or full
square stock – all cut efciently with
a simple cutter change
• Small gear head – allows
cutting in conned areas
• No adjustment required when switching material thickness
• Worn cutters are changed in minutes with adjustable wrench
• Includes: Die & Punch
18 GAUGE NIBBLER
• 3.2 amp motor; 2,500 SPM
• Unique cutting head design
for multiple types of
corrugated steel
• Ejects chips downward away from
operator and workpiece
• 3-Position head cuts forward, left
and right
• Flat stock, corrugated, trapezoidal or full square stock
all cut efciently
• Small gear head allows cutting in conned areas
• No adjustment required when switching material thickness
• Includes: Die, Punch & 26 Gauge Die
1500C
Unishear
®
1507
Unishear
®
Unishear
®
1506
1529B
1508
1530
SHEARS & NIBBLER