Specifications

130
Toll Free to Bronx, New York 800-255-0910
CARBIDE TIPPED ROUTER BITS – ROUTER ACCESSORIES
ROMAN OGEE
REVERSE CURVE BALL
BEARING PILOT BITS
FOR DECORATIVE EDGING
AND FURNITURE
LOWER DEPTH SETTING
RESULTS IN ADDITION OF FILLET
Bit A B C D E
Cat. Overall Flute Shank Shank
No. Diameter Length Radius Dia. Length
43126PC* 1-3/16” 1/2” 5/32” 1/4” 1-1/4”
43127PC* 1-1/2” 25/32” 1/4” 1/4” 1-1/4”
43133PC* 1-1/2” 25/32” 1/4” 1/2” 1-1/2”
COVE
BALL BEARING
PILOT BITS
FOR CUTTING DECORATIVE
EDGING, INVERTED RADII,
WHERE SMOOTHER FINISH IS DESIRED
Bit A B C D
Cat. Flute Shank Shank
No. Radius Length Dia. Length
43102PC* 1/4” 1/2” 1/4” 1-1/4”
43103PC* 3/8” 9/16” 1/4” 1-1/4”
43104PC* 1/2” 21/32” 1/4” 1-1/4”
CORNER ROUND
BALL BEARING
PILOT BITS
FOR SMOOTH,
UNIFORMLY ROUNDED EDGES
LOWER DEPTH SETTING
RESULTS IN ROUNDED CORNER
WITH DECORATIVE FILLET
REPLACEMENT BEARING #43401
Bit A B C D
Cat. Flute Shank Shank
No. Radius Length Dia. Length
43418PC* 1/16” 5/16” 1/4” 1-1/4”
43404PC* 5/32” 1/2” 1/4” 1-1/4”
43421PC* 1/8” 5/16” 1/4” 1-1/4”
43422PC* 1/8” 5/16” 1/2” 1-1/2”
43085PC* 3/16” 1/2” 1/4” 1-1/4”
43402PC* 1/4” 17/32” 1/4” 1-1/4”
43425PC* 1/4” 17/32” 1/2” 1-1/2”
43086PC* 5/16” 9/16” 1/4” 1-1/4”
43405PC* 3/8” 5/8” 1/4” 1-1/4”
43427PC* 3/8” 5/8” 1/2” 1-1/2”
43408PC* 1/2” 3/4” 1/4” 1-1/4”
43091PC* 1/2” 13/16” 1/2” 1-1/2”
43108PC* 5/8” 15/16” 1/2” 1-1/2”
43092PC* 3/4” 1” 1/2” 1-1/2”
43431PC* 7/8” 1-1/8” 1/2” 1-1/2”
43428PC* 1” 1-1/4” 1/2” 1-1/2”
* New chip limiting design provides better control
ROUTER ACCESSORIES & DOOR HANGING KITS
DOOR HINGE TEMPLATE KIT
59370
HINGE BUTT TEMPLATE KIT
59381
STRIKE & LATCH PLATE TEMPLATE KIT
MICRO EDGE GUIDES
42700
FOR USE WITH MODELS 7518, 7519,
7529, 7536, 7537, 7538 and 7539
42690
FOR USE WITH MODELS 100, 690,
690LR, 690LRVS, 691 and 693
MICRO EDGE GUIDE
SHOWN WITH ROUTER
1/2” COLLET
42950
3/8” COLLET
42975
1/4” COLLET
42999
59375