Specifications

www.kassind.com
BRONX
New York
718-299-6060
718-299-1593
MAMARONECK
New York
914-777-3245
914-777-3875
ISLANDIA
Long Island
631-234-0740
631-234-0686
BENSALEM
Pennsylvania
215-244-1545
215-244-1082
Ph:
Fx:
127
Headquarters
SANDERS AND PLATE JOINER
3” X 21”
VARIABLE-SPEED BELT SANDER
• 8.0 Amps, 850-1,300 SFPM
Belt Speed
• Belt & gear drive
• Dust bag swivels 360°
• Fingertip belt-tracking knob
• Quick-release belt-change lever
• Designed for flush sanding up to
vertical surfaces
• Motor is located over platen
for maximum performance and
perfect balance
• Includes: 100G ceramic aluminum oxide belt, dust bag
assembly & operating manual
352VS
24” BELT SANDERS
• 12.0 Amps, 1,500 SFPM Belt Speed
• Motor is located over platen for maximum
performance and perfect balance
• Belt & gear drive system transfers power
from the motor to the sanding belt
• Quick-release belt-change lever
• Fingertip belt-tracking knob for quick,
accurate belt adjustments
• Large capacity dust collection bag
swivels 360° so it's never in the way during sanding
• User-friendly design with ergonomically correct handles
• Both models include: 100G ceramic aluminum oxide belt,
dust bag assembly & operating manual
360
3” Wide
362
4” Wide
HALF-SHEET
FINISHING SANDER
• 2.3 Amps, 10,000 OPM
• 1.4/2.4 Amps,
5,000-12,000 OPM
• 1/8” orbit
• 100% ball bearings
• Smooth, low vibration
• Solid metal frame for precision
seating and alignment of
bearings, motor, and fan,
providing the maximum in long, trouble-free tool life
• All-metal housing and trigger for reduced vibration
and long trouble-free tool life
• Includes: abrasive sheet & operating manual
505
SPEED-BLOC
®
QUARTER-SHEET FINISHING SANDER
• 1.2 Amps, 14,000 OPM
• Pad Size: 4-1/2”x5-1/2”
• Comfortable, easy-grip outer housing for hours
of use without fatigue
• Solid metal frame for precision seating and
alignment of bearings, motor, and fan, providing
the maximum in long, trouble-free tool life
• Rubber posts isolate your hand from
vibration while enabling full sanding action
and efficiency on the work
• 100% ball bearings
• Uses pre-cut adhesive or self cut standard paper with metal stamp
• Includes: abrasive sheet, clamp tool & operating manual
330
PLATE JOINER KIT
• 7.5 Amps, 10,000 RPM
• Lock-on trigger
• 1” O.D. dust port accepts standard bag or can be
connected to a vacuum
• Fence tilts from 0° to 135° with positive adjustable stop at 90°
• Seven-position rotating depth stop for FF, #0, #10, #20,
Simplex, Duplex, and Max (#6) biscuits
• Bale handle attached to fence, not motor, for greater stability
and added control during cuts
• Blade Type: 4 & 6 tooth (CT)
• Includes: 2” & 4” blades, centering plate, dust bag, chip
deflector, Allen wrench, carrying case & operating manual
557
BISCUITS IN REUSEABLE CONTAINERS ARE ALSO AVAILABLE -
CALL YOUR REPRESENTATIVE FOR SIZES