Specifications

RIGOL

User’s Guide for DG3000 Series

2-23

2. To Select the Stored Waveform

Press Arb  Sel Wform  Stored Wform , and enter the following

interface.

Figure 2-24 Table 2-10 The Menu Explanations of Stored Arbitrary Waveform

(Page 1/2)

Figure 2-25 Table 2-11 The Menu Explanations of Stored Arbitrary Waveform

(Page 2/2)

Function

Settings

Explanation

ARB Mem1

Select the Arb Waveform stored in the

non-Volatile Memory. The location is:

C:\ARB1:ARB_1

ARB Mem 2

Select the Arb Waveform stored in the

non-Volatile Memory. The location is:

C:\ARB2:ARB_2

ARB Mem 3

Select the Arb Waveform stored in the

non-Volatile Memory. The location is:

C:\ARB3:ARB_3

ARB Mem 4

Select the Arb Waveform stored in the

non-Volatile Memory. The location is:

C:\ARB4:ARB_4

Function

Settings

Explanation

Select Arb

Open the selected waveform

Instructions:

When there is no waveform stored in the Arb Mem1 、 Arb Mem2 、 Arb Mem3

and Arb Mem4, this menu will hide. (The followings are the same and will not be

explained )