Install Instructions

ManualsBrandsDewalt ManualsAir Conditioning Installation Parts1/4" x 1-3/4" Aggre-Gator Phillips Trimfit Head, 300 Stainless (Box of 300)

NCHORS & FASTENERS

PERFORMANCE DATA

Mechanical anchors

Ultimate Load Capacities for Aggre-Gator in Hollow and Grout-Filled Concrete Masonry

1,2

Nominal Anchor

Diameter

(in.)

Min. Edge Dist.

(in.)

Min. Spacing

(in.)

Min. Embed.

(in.)

Hollow Bock Grout-Filled Block

Tension

(lbs.)

Shear

(lbs.)

Tension

(lbs.)

Shear

(lbs.)

1/4

2 3

1-1/4 780 935 830 1035

2 - - 1625 2365

4 1-1/2

1-1/4 - - 745 1410

2 - - 2015 2385

4 3 1-1/4 880 1055 - -

1. Tabulated load values are for anchors installed in grout-filled concrete block conforming to ASTM C-90.

2. Ultimate load capacities must be reduced by a minimum safety factor of 5.0 or greater to determine allowable working load. Consideration of safety factors of 10 and higher may be necessary

depending upon the application such as life safety or overhead.

Allowable Load Capacities for Aggre-Gator in Hollow and Grout-Filled Concrete Masonry

1,2

Nominal Anchor

Diameter

(in.)

Min. Edge Dist.

(in.)

Min. Spacing

(in.)

Min. Embed.

(in.)

Hollow Bock Grout-Filled Block

Tension

(lbs.)

Shear

(lbs.)

Tension

(lbs.)

Shear

(lbs.)

1/4

2 3

1-1/4 155 185 165 205

2 - - 325 470

4 1-1/2

1-1/4 - - 145 280

2 - - 400 475

4 3 1-1/4 175 210 - -

1. Allowable load capacities listed are calculated using an applied safety factor of 5.0. Consideration of safety factors of 10 or higher may be necessary depending on the application, such as life

safety or overhead.

2. Allowable loads suggested herein are only valid when both the minimum anchor center-to-center spacing and minimum edge distances are complied with.