Install Instructions

TECHNICAL GUIDE – MECHANICAL ANCHORS ©2021 DEWALT – REV. C
A
NCHORS & FASTENERS
ORDERING INFORMATION
Mechanical anchors
13
Bronze UltraCon+ Master Pack
Cat. No.
Screw Size Quantity
HWH PFH TFH
- DFM2ELG612 - 3/16" x 2-3/4" 1500
- - DFM2ELG832 1/4" x 2-3/4" 1000
- - DFM2ELG862 1/4" x 3-1/4" 1000
- - DFM2ELG892 1/4" x 3-3/4" 500
DFM2ELE465 - - 1/4" x 4" 500
Add Notes under table:
- HWH = Hex Washer Head (slotted); PFH = Phillips Flat Head; TFH = TrimFit Flat Head
- Drill bit not included with master pack.
TrimFit Flat Head Anchors are not covered by ICC-ES ESR-3042.
- Hex Washer Head and Hex Flange Head UltraCon+ anchors are measured from below the washer. Phillips Flat
Head and TrimFit Flat Head UltraCon+ anchors are measured end to end.
- To select the proper minimum anchor length, determine the embedment depth required to obtain desired load
capacity. Then add the thickness of the fixture, including any spacers or shims, to the embedment depth.
UltraCon+ Drill Bits
Cat. No. Description
DW5381 5/32" x 7" UltraCon+ SDS bit
DW5382 3/16 x 7" UltraCon+ SDS bit
Installation Kit
Cat. No. Description
DW5366
UltraCon
®
+ Installation Kit includes: 5/32"
and 3/16" UltraCon+ bit, 1/4" and 5/16"
nutsetters, #2 and #3 Phillips bits, Phillips
flat head adapter, percussion adapter, drive
sleeve and 1/8" allen wrench
Rotary Hammers
Cat. No. Description
DCH273
20V Max* XR Brushless 1"
L-Shape SDS Plus Rotary Hammer
DCH133
20V Max* XR Brushless 1"
D-Handle SDS Plus Rotary Hammer
Accessories
Cat. No. Description
DWH303DH
Onboard Dust Extractor for
1 in. SDS Plus Hammers
DWH050 Large Hammer Dust Extraction - Hole Cleaning
DWH200 Dust Extraction Tube Kit with Hose
Dust Extractors
Cat. No. Description
DCV585 Flexvolt
®
60V Max* Dust Extractor
DVW010 8 Gallon Wet Dry Hepa/Rrp Dust Extractor
DWV012 10 Gallon Wet Dry Hepa/Rrp Dust Extractor
DWH161D1
20V Max* XR Brushless Universal Dust
Extractor Kit