User Manual

12
ENGLISH
Read instruction manual beforeuse.
See Technical Data for chargingtime.
Do not probe with conductiveobjects.
Do not charge damaged batterypacks.
Do not expose to water.
Have defective cords replacedimmediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indooruse.
Discard the battery pack with due care for
theenvironment.
Charge DeWALT battery packs only with designated
DeWALT chargers.Charging battery packs other
than the designated DeWALT batteries with a
DeWALT charger may make them burst or lead to
other dangeroussituations.
Do not incinerate the batterypack.
USE(without transport cap).Example: Wh rating
indicates 108 Wh(1 battery with 108 Wh).
TRANSPORT(with built‑in transport cap).Example:
Wh rating indicates 3 x 36 Wh(3batteries of 36Wh).
Battery Type
The DCS570 operates on a 18 volt batterypack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB189,
DCB546, DCB547, DCB548. Refer to Technical Data for
moreinformation.
Package Contents
The package contains:
1 Circular saw
1 Circular saw blade
1 Blade wrench
1 Parallel fence
1 Dust extraction port
1 Charger(C, D, L, M, P, S, T, X models)
1 Li‑Ion battery pack(C1, D1, L1, M1, P1, S1, T1, X1, Y1models)
2 Li‑Ion battery packs(C2, D2, L2, M2, P2, S2, T2, X2, Y2models)
3 Li‑Ion battery packs(C3, D3, L3, M3, P3, S3, T3, X3, Y3models)
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included
with N models.Battery packs and chargers are not included with
NT models.Bmodels include Bluetooth® batterypacks.
NOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc.and any use of
such marks by DeWALT is under license.Other trademarks and
trade names are those of their respectiveowners.
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earprotection.
Wear eyeprotection.
Visible radiation.Do not stare intolight.
Date Code Position(Fig.A)
The date code
19
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2019XXXX
Year of Manufacture
Description (Fig. A, E)

WARNING: Never modify the power tool or any part of
it.Damage or personal injury couldresult.
1
Trigger switch lock‑off button
2
Trigger switch
3
Battery pack
4
Depth adjustment lever(Fig.E)
5
Base plate
6
Lower blade guard retracting lever
7
Lower blade guard
8
Blade clamping screw
9
Kerf indicator
10
Bevel adjustment lever
11
Blade lock button
12
Auxiliary handle
13
Battery release button
14
Blade wrench(Fig.E)
15
Worklight