User Manual
31
ENGLISH
Package Contents
The package contains:
1   Chipping  hammer
1   Side  handle
1   Kitbox
1   Instruction  manual
NOTE: Battery packs and chargers are not included with N 
models. Battery packs and chargers are not included with NT 
models. Bmodels include Bluetooth® batterypacks.
NOTE: The Bluetooth® word mark and logos are registered 
trademarks owned by the Bluetooth®, SIG, Inc. and any use of 
such marks by DeWALT is under license. Other trademarks and 
trade names are those of their respectiveowners.
•  Check for damage to the tool, parts or accessories which may 
have occurred duringtransport.
•  Take the time to thoroughly read and understand this manual 
prior tooperation.
Battery Type
The following tools operate on a 54 volt battery pack: 
DCH832, DCH892 
These battery packs may be used: DCB546, DCB547, DCB548, 
DCB549. Refer to Technical Data for moreinformation.
 s
Do not expose towater.
 t
Have defective cords replacedimmediately
 u
Charge only between 4˚C and 40˚C.
 v
Only for indooruse.
 x
Discard the battery pack with due care for 
theenvironment.
 y
Charge DeWALT battery packs only with designated 
DeWALT chargers. Charging battery packs other than 
the designated DeWALT batteries with a DeWALT 
charger may make them burst or lead to other 
dangeroussituations.
 z
Do not incinerate the batterypack.
 B
USE (without transport cap). Example: Wh rating 
indicates 108Wh (1battery with 108Wh).
 A
TRANSPORT (with built‑in transport cap). Example: Wh 
rating indicates 3x 36Wh (3batteries of 36Wh).
implied, is given. It is the buyer’s responsibility to ensure that its 
activities comply with the applicableregulations.
Transporting the FLEXVOLT
TM
 Battery
The DeWALT FLEXVOLT
TM
 battery has two modes: Use 
andTransport.
Use Mode: When the FLEXVOLT
TM
 battery stands alone or is in 
a DeWALT 18V product, it will operate as an 18V battery. When 
the FLEXVOLT
TM
 battery is in a 54V or a 108V (two 54V batteries) 
product, it will operate as a 54Vbattery.
Transport Mode: When the cap is attached to the FLEXVOLT
TM
battery, the battery is in Transport mode. Keep the cap 
forshipping.
When in Transport mode, strings 
of cells are electrically 
disconnected within the pack 
resulting in 3batteries with a 
lower Watt hour (Wh) rating as compared to 1battery with a 
higher Watt hour rating. This increased quantity of 3batteries 
with the lower Watt hour rating can exempt the pack from 
certain shipping regulations that are imposed upon the higher 
Watt hour batteries. 
For example, the Transport 
Wh rating might indicate 
3x36Wh, meaning 
3batteries of 36Wh each. 
The Use Wh rating might 
indicate 108Wh (1batteryimplied).
Storage Recommendations
1.  The best storage place is one that is cool and dry away 
from direct sunlight and excess heat or cold. For optimum 
battery performance and life, store battery packs at room 
temperature when not inuse.
2.  For long storage, it is recommended to store a fully charged 
battery pack in a cool, dry place out of the charger for 
optimalresults.
NOTE: Battery packs should not be stored completely 
depleted of charge. The battery pack will need to be recharged 
beforeuse.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the 
labels on the charger and the battery pack may show the 
followingpictographs:
 L
Read instruction manual beforeuse.
 p
See Technical Data for chargingtime.
 q
Do not probe with conductiveobjects.
 r
Do not charge damaged batterypacks.
Example of Use and Transport Label Marking










