DCF836 DCF886
Figure 1 g c g d g b a k h e i f j i Figure 2 f e l 1
Figure 4 Figure 3 c d c d 2
ENGLISH BRUSHLESS CORDLESS COMPACT IMPACT DRIVER DCF836, DCF886 Congratulations! You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. Technical Data Voltage Type Battery type Power output No load speed Impact rate Max torque Tool holder Weight (without battery pack) LPA (sound pressure) KPA (sound pressure uncertainty) LWA (sound power) KWA (sound power uncertainty) kg DCF836 14.
EN GLI S H Battery pack Battery type Voltage Capacity Weight Battery pack Battery type Voltage Capacity Weight VDC Ah kg DCB140 Li-Ion 14.4 3.0 0.53 DCB141 Li-Ion 14.4 1.5 0.30 DCB142 Li-Ion 14.4 4.0 0.54 DCB143 Li-Ion 14.4 2.0 0.30 VDC Ah kg DCB180 Li-Ion 18 3.0 0.64 DCB181 Li-Ion 18 1.5 0.35 DCB182 Li-Ion 18 4.0 0.61 DCB183 Li-Ion 18 2.0 0.40 Charger Mains voltage Battery type Approx. charging time min Weight kg Fuses Europe U.K. & Ireland DCB105 230 V Li-Ion VAC 30 (1.
ENGLISH WARNING: To reduce the risk of injury, read the instruction manual. General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE The term “power tool” in the warnings refers to your mains-operated (corded) power tool or batteryoperated (cordless) power tool.
EN GLI S H d) e) f) g) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
ENGLISH CAUTION: Children should be supervised to ensure that they do not play with the appliance. NOTICE: Under certain conditions, with the charger plugged in to the power supply, the exposed charging contacts inside the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminium foil or any buildup of metallic particles should be kept away from charger cavities.
EN GLI S H x problem pack or charger • • • • • • • • • • • • problem powerline •• •• •• •• •• •• This charger will not charge a faulty battery pack. The charger will indicate faulty battery by refusing to light or by displaying problem pack or charger blink pattern. NOTE: This could also mean a problem with a charger. If the charger indicates a problem, take the charger and battery pack to be tested at an authorised service centre.
ENGLISH Battery Pack BATTERY TYPE The DCF836 operates on 14.4 volt battery packs. Do not expose to water. The DCF886 operates on 18 volt battery packs. Have defective cords replaced immediately. The DCB140, DCB141, DCB142, DCB143, DCB180, DCB181, DCB182, or DCB183 battery packs may be used. Refer to Technical Data for more information. Charge only between 4 °C and 40 °C. Storage Recommendations Discard the battery pack with due care for the environment. 1.
EN GLI S H e. Battery release button f. Battery pack Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 3 A. g. Worklight Using an Extension Cable h. Belt hook An extension cord should not be used unless absolutely necessary. Use an approved extension cable suitable for the power input of your charger (see Technical Data). The minimum conductor size is 1 mm2; the maximum length is 30 m. i. Screw j. Magnetic bit holder k. Main handle l.
ENGLISH NOTE: The fuel gauge is only an indication of the charge left on the battery pack. It does not indicate tool functionality and is subject to variation based on product components, temperature and end-user application. Variable Speed Trigger Switch (fig. 1) Belt Hook and Bit Clip (fig. 1) The variable speed switch enables you to start the application at a slow speed. The further you squeeze the trigger, the faster the tool will operate.
EN GLI S H Place the forward/reverse button (b) in the locked off (centre) position or remove battery pack before changing accessories. To install an accessory, push accessory to fully insert into chuck. The chuck collar does not need to be pulled up to lock accessory in place. To remove an accessory, pull the chuck collar away from the front of the tool. Remove the accessory and release the collar. Usage Your impact tool generates the following maximum torque: Cat # DCF836 DCF886 Nm 155 165 Ft.-Lbs.
ENGLISH Optional Accessories WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT recommended accessories should be used with this product. WARNING: To reduce the risk of injury, only use DEWALT impact-ready accessories. WARNING: Use only impact accessories. Non-impact accessories may break and cause a hazardous condition.
EN GLI S H GUARANTEE DEWALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the product. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
