DCF825 DCF895
English (original instructions) 3 Copyright DEWALT 2
Figure 1 g d g c b g a k j h h i e i f l i Figure 2 f e m 1
Figure 4 Figure 3 j Figure 5 Figure 6 d d c 2
ENGLISH BRUSHLESS CORDLESS IMPACT DRIVERS DCF825, DCF895 Congratulations! You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. Technical Data Voltage Type Battery Type No load speed DCF825 14.4 1/2/10/11 Li-Ion rpm 0–900 0–1850 0–2800 ipm 0–1200 0–2300 0–3200 Nm 160 6.35 mm (1/4") kg 1.
EN GLI S H Charger Mains voltage Battery type Approximate charging time of battery packs Weight Weight 25 (1.3 Ah) 55 (3.0 Ah) VAC min 60 (1.3 Ah) 140 (3.0 Ah) kg Charger Mains voltage Battery type Approximate charging time of battery packs Fuses Europe U.K. & Ireland min kg Charger Mains voltage Battery type Approximate charging time of battery packs Weight VAC VAC min 40 (1.3 Ah) 90 (3.0 Ah) kg 230 V tools 230 V tools DCB105 230 V Li-Ion 30 (1.5 Ah) 70 (4.0 Ah) 0.
ENGLISH 1) WORK AREA SAFETY a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) ELECTRICAL SAFETY a) Power tool plugs must match the outlet. Never modify the plug in any way.
EN GLI S H g) Use the power tool, accessories and tool bits etc., in accordance with these instructions taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) BATTERY TOOL USE AND CARE a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
ENGLISH • DO NOT attempt to charge the battery pack with any chargers other than the ones in this manual. The charger and battery pack are specifically designed to work together. • These chargers are not intended for any uses other than charging DEWALT rechargeable batteries. Any other uses may result in risk of fire, electric shock or electrocution. • Do not expose charger to rain or snow. • Pull by plug rather than cord when disconnecting charger. This will reduce risk of damage to electric plug and cord.
EN GLI S H by refusing to light or by displaying problem pack or charger blink pattern. NOTE: This could also mean a problem with a charger. If the charger indicates a problem, take the charger and battery pack to be tested at an authorised service centre. HOT/COLD PACK DELAY When the charger detects a battery that is too hot or too cold, it automatically starts a Hot/Cold Pack Delay, suspending charging until the battery has reached an appropriate temperature.
ENGLISH The DCB140, DCB141, DCB142, DCB143, DCB144, DCB145, DCB180, DCB181, DCB182, DCB183, DCB184 or DCB185 battery packs may be used. Refer to Technical Data for more information. Discard the battery pack with due care for the environment. Charge DEWALT battery packs only with designated DEWALT chargers. Charging battery packs other than the designated DEWALT batteries with a DEWALT charger may make them burst or lead to other dangerous situations. Storage Recommendations 1.
EN GLI S H INTENDED USE cable suitable for the power input of your charger (see Technical Data). The minimum conductor size is 1 mm2; the maximum length is 30 m. These impact wrench/drivers are designed for professional impact screwdriving applications. The impact function makes this tool particularly useful for driving fasteners in wood, metal and concrete. When using a cable reel, always unwind the cable completely. DO NOT use under wet conditions or in presence of flammable liquids or gases.
ENGLISH before making any adjustments or removing/installing attachments or accessories. WARNING: To reduce the risk of serious personal injury, DO NOT suspend tool overhead or suspend objects from the belt hook. ONLY hang tool’s belt hook from a work belt. WARNING: To reduce the risk of serious personal injury, ensure the screw holding the belt hook is secure. IMPORTANT: When attaching or replacing the belt hook or magnetic bit holder, use only the screw (i) that is provided.
EN GLI S H Accessory Insertion and Release (fig. 1, 5, 6) NOTE: These tools only accept 6.35 mm (1/4") hex accessories. To install an accessory, fully insert the accessory into the chuck (d). The accessory is locked into place (fig. 5). To remove an accessory, push on the accessory release button (c). Remove the accessory then release the accessory release button (fig. 6).
ENGLISH Optional Accessories WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT recommended accessories should be used with this product. WARNING: To reduce the risk of injury, only use DEWALT impact-ready accessories. Consult your dealer for further information on the appropriate accessories.
Belgique et Luxembourg België en Luxemburg DEWALT - Belgium BVBA Egide Walschaertsstraat 16 2800 Mechelen Tel: NL Tel: FR Fax: Danmark DEWALT Roskildevej 22 2620 Albertslund Tel: 70 20 15 10 Fax: 70 22 49 10 www.dewalt.dk kundeservice.dk@sbdinc.com Deutschland DEWALT Richard Klinger Str. 11 65510 Idstein Tel: 06126-21-1 Fax: 06126-21-2770 www.dewalt.de infodwge@sbdinc.com Ελλάς DEWALT (Ελλάς) Α.Ε. Τηλ: 00302108981616 EΔΡΑ-ΓΡΑΦΕΙΑ : Στράβωνος 7 Φαξ: 00302108983570 & Λ.
