www. .
Figure 1 D25899 e d a b f p c D25901 e d a b f p D25941 e d a b f p 1
Figure 2 Figure 3 D25899 D25901 Figure 4 D25899 D25901 e 2
Figure 5 D25941 Figure 6 h D25941 19 mm e g 3
Figure 7 d Figure 8 x f q 4 g
Figure 9 i j k l m n o 5
E N GL I SH DEMOLITION HAMMER D25899, D25901, D25941 Congratulations! You have chosen a DEWALT power tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. Technical Data Voltage U.K.
EN G LIS H Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
E N GL I SH c) d) e) f) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
EN G LIS H • Use auxiliary handles supplied with the tool. Loss of control can cause personal injury. • Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Cutting accessory Contacting a “live” wire may make exposed metal parts of the tool “live” and shock the operator. – Health hazards caused by breathing dust developed when working in concrete and/or masonry.
E N GL I SH INTENDED USE The D25899, D25901 and D25941 heavy-duty demolition hammers are designed for heavy-duty demolition, chipping and chasing applications. DO NOT use under wet conditions or in presence of flammable liquids or gases. These heavy-duty demolition hammers are professional power tools. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.
EN G LIS H 1. Clean the chisel shank. WARNING: Do not apply lubricant to the machine. 2. Insert the chisel shank into the tool holder/ sleeve (e). Press and turn the chisel slightly until the sleeve snaps into position. 3. Pull on the chisel to check if it is properly locked. The hammering function requires the chisel to be able to move axially several centimetres when locked in the tool holder. 4. To remove a chisel, pull back the tool holder/ sleeve (e) and pull the chisel out of the tool holder.
E N GL I SH Proper hand position requires one hand on the side handle (f), with the other hand on the main handle (b). Switching On and Off (fig. 1) Switching on: set the on/off switch (a) to position 1. Switching off: set the on/off switch (a) to position 0. Demolition, Chasing and Channelling (fig. 1) WARNING: These chisels can be reground only a limited number of times. If in doubt, contact your dealer for recommendations.
EN G LIS H Should you find one day that your DEWALT product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection. Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.
Belgique et Luxembourg België en Luxemburg Black & Decker - DEWALT Nieuwlandlaan 7, IZ Aarschot B156 B-3200 Aarschot Danmark DEWALT Sluseholmen 2-4 2450 København SV Tlf: 70201511 Fax: 70224910 www.dewalt.dk Deutschland DEWALT Richard Klinger Str. 11 65510 Idstein Tel: 06126-21-1 Fax: 06126-21-2770 www.dewalt.de ǼȜȜȐȢ Black & Decker (ǼȜȜȐȢ) ǹ.Ǽ. ȈIJȡȐȕȦȞȠȢ 7 & ǺȠȣȜȚĮȖȝȑȞȘȢ 159 īȜȣijȐįĮ 16674, ǹșȒȞĮ España DEWALT Parque de Negocios “Mas Blau” Edificio Muntadas, c/Bergadá, 1, Of.
