www. .
Copyright DEWALT 2
c Figure 1 d n f m g i a b e k j D25123 D25124 h Figure 2 d e 1
Figure 4 Figure 3 f g l j Figure 6 Figure 5 c k i 2
Figure 7 Figure 8 h f j o m h 3
EN GLI S H HEAVY-DUTY ROTARY HAMMERDRILL D25123, D25124 Congratulations! You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. Technical Data Voltage (U.K.
ENGLISH WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage. Denotes risk of electric shock. Denotes risk of fire.
EN GLI S H f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3) PERSONAL SAFETY a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
ENGLISH • Wear safety goggles or other eye protection. Hammering operations cause chips to fly. Flying particles can cause permanent eye damage. Wear a dust mask or respirator for applications that generate dust. Ear protection may be required for most applications. • Keep a firm grip on the tool at all times. Do not attempt to operate this tool without holding it with both hands. It is recommended that the side handle be used at all times. Operating this tool with one hand will result in loss of control.
EN GLI S H e. Safety lock f. Tool holder g. Dust cover h. Locking collar (D25124) i. Depth adjustment rod j. Side handle k. Depth stop clamp • Connect the blue lead to the neutral terminal. WARNING: No connection is to be made to the earth terminal. Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 3 A.
ENGLISH Indexing the Chisel Position (fig. 2) The chisel can be indexed and locked into 52 different positions. Setting the Drilling Depth (fig. 5) 1. Insert the required drill bit as described above. 2. Press the depth stop clamp (k) and keep it depressed. 1. Rotate the mode selector switch (d) until it points to the “bit rotation” position. 3. Fit the depth adjustment rod (i) through the hole in the depth stop clamp. 2. Rotate the chisel in the desired position. 4. Adjust the drilling depth as shown.
EN GLI S H 1. Pull back the tool holder locking sleeve (l) and pull the dust cover (g) off. 2. Fit the new dust cover. 3. Release the tool holder locking sleeve. OPERATION Instructions for Use Hammerdrilling (fig. 1) DRILLING WITH A SOLID BIT 1. Set the mode selector switch (d) to the hammerdrilling position. 2. Insert the appropriate drill bit. NOTE: For best results use high quality carbidetipped bits. WARNING: 3. Adjust the side handle (j) as required.
ENGLISH WARNING: Never use standard chucks in the hammerdrilling mode. Screwdriving (fig. 1) 1. Set the mode selector switch (d) to the rotary drilling position. 2. Select the direction of rotation. 3. Depending on your tool, follow either of the following instructions: WARNING: To reduce the risk of injury, turn unit off and disconnect machine from power source before installing and removing accessories, before adjusting or changing setups or when making repairs.
EN GLI S H Optional Accessories WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT, recommended accessories should be used with this product. Various types of SDS Plus® drill bits and chisels are available as an option. Consult your dealer for further information on the appropriate accessories. Protecting the Environment Separate collection.
13
Belgique et Luxembourg België en Luxemburg Black & Decker - DEWALT Nieuwlandlaan 7, IZ Aarschot B156 B-3200 Aarschot Tel: +32 (0)015 - 15 47 9211 Fax: +32 (0)015 - 15 47 9210 www.dewalt.be Danmark DEWALT Sluseholmen 2-4 2450 København SV Tlf: 70201511 Fax: 70224910 www.dewalt.dk Deutschland DEWALT Richard-Klinger-Straße 65510 Idstein Tel: 06126-21-1 Fax: 06126-21-2770 www.dewalt.de Ελλάς Black & Decker (Hellas) S.A.
