Operation Manual

21
E N G L I S H
Safety instructions
Observe the safety regulations in the
instruction manual of the Power Tool to be
connected to this attachment. Also observe any
applicable additional safety rules. Read the
following safety instructions before attempting
to operate this product.
Keep these instructions in a safe place!
General
1 Keep work area clean
Cluttered areas and benches can cause
accidents.
2 Keep children away
Do not let children come into contact with the
tool or its attachments. Keep all people away
from the work area.
3 Dress properly
Do not wear loose clothing or jewellery.
They can be caught in moving parts. Preferably
wear rubber gloves and non-slip footwear when
working outdoors. Wear protective hair covering
to keep long hair out of the way.
4 Wear safety goggles
Also use a face or dust mask in case the
operations produce dust or flying particles.
5 Beware of maximum sound pressure
Take appropriate measures for the protection of
hearing if the sound pressure of 85 dB(A) is
exceeded.
6 Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
7 Use appropriate tool
The intended use is laid down in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which
it was intended. Warning! The use of any
accessory or attachment or performance of any
operation with this tool, other than those
recommended in this instruction manual may
present a risk of personal injury.
8 Have your Power Tool Attachment repaired
by an authorized DEWALT repair agent
Repair of your Power Tool Attachment being a
matter of precision and skill, always take it to
your DEWALT Authorized Repair Agent.
Package contents
The package contains:
1 Drill stand
1 Feed handle
1 Allen key, 6 mm
1 Instruction manual
1 Exploded drawing
● Check for damage to the tool, parts or
accessories which may have occurred during
transport.
● Take the time to thoroughly read and
understand this manual prior to operation.
Description (fig. A1 & A2)
Your D215821 drill stand has been designed to
extend the capabilities of your DEWALT diamond
drilling machine. The stand enables set up in both
vertical and horizontal applications.
The drill stand is suitable for use with the following
DEWALT models: D21580K/D21582K, or with any
other diamond drill with a 53 mm collar.
Fig. A1
1 Carriage
2 Carriage lock
3 Feed handle
4 Drill holder
5 Column
6 Base
7 Air level for vertical applications
8 Air level for horizontal applications
9 Friction knob
10 Drilling depth scale
11 Stabilizer bolts
Optional accessories (fig. A2)
Consult your dealer for further information on the
appropriate accessories.
18 D215825 Fastening set for concrete
19 D215826 Fastening set for masonry
20 D215827 Spare dowel for concrete (10 pcs)
21 D215828 Spare dowel for masonry
22 D215835 Bracing bracket
23 D215822 Water collection ring
24 D215823 Spare seal for water collection
ring (10 pcs)