www. .
Figure 1 DWD522/DWD524/DWD530 c DWD525 c d d g g b b e a a e j j i c d g h b a e D21570 j Figure 3 Figure 2 l b k a m e j 1
Figure 4 Figure 5 n DWD530/D21570 f d Figure 6 g e 2
Figure 7 c Figure 8 Figure 9 3
E NG L I S H DUAL SPEED PERCUSSION DRILL DWD522, DWD524, DWD525, DWD530, D21570 Congratulations! You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users.
EN GLI S H The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ.
E NG L I S H c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) ELECTRICAL SAFETY a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
EN GLI S H 5) SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. • Do not operate this tool for long periods of time. Vibration caused by hammer action may be harmful to your hands and arms. Use gloves to provide extra cushion and limit exposure by taking frequent rest periods.
E NG L I S H 1 Instruction manual 1 Exploded drawing • Check for damage to the tool, parts or accessories which may have occurred during transport. • Take the time to thoroughly read and understand this manual prior to operation. Description (fig. 1, 4) WARNING: Never modify the power tool or any part of it. Damage or personal injury could result. a. Trigger switch b. Reversing lever c. Chuck d. Speed/mode selector collar e. Side handle f. Indicator light (DWD530, D21570) g. Main handle h. Date code i.
EN GLI S H E-CLUTCH ANTI-LOCK CONTROL™ (FIG. 4) DWD530, D21570 Your DEWALT drill may come with an electronic feature called E-CLUTCH Anti-Lock Control™. It is designed to help you control the drill during a stall and keep it from pulling out of your hands. This may be encountered when drilling in steel or using large bits in wood. As a stall situation presents itself, the motor cycles on and off for a set period of time. This reduces the reaction of the stall and allows you to keep the drill under control.
E NG L I S H After the side handle is rotated into position, it should be pushed rearward until the slots (k) on the lip of the side handle are aligned with and fully engaged with the projecting tabs (m) on the underside of the gear case. The side handle is then securely clamped by turning clockwise until tight.
EN GLI S H 2. Place chuck key in each of the three holes, and tighten in clockwise direction. It’s important to tighten chuck with all three holes to prevent slippage. To release bit, turn chuck key counterclockwise in just one hole, then loosen the chuck by hand. Any authorized DEWALT service center can install a keyless chuck in place of a keyed chuck. Depth Rod (fig.
E NG L I S H 2. Remove and unplug the machine. 3. Remove the centredrill from its holder. 4. Plug the machine in and insert the core bit into the workpiece. 5. Begin drilling, increasing to full speed and drill to the desired depth. MAINTENANCE Your DEWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
EN GLI S H GUARANTEE DEWALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the product. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
Belgique et Luxembourg België en Luxemburg Black & Decker - DEWALT Nieuwlandlaan 7, IZ Aarschot B156 B-3200 Aarschot Danmark DEWALT Sluseholmen 2-4 2450 København SV Tlf: 70201511 Fax: 70224910 www.dewalt.dk Deutschland DEWALT Richard Klinger Str. 11 65510 Idstein Tel: 06126-21-1 Fax: 06126-21-2770 www.dewalt.de Ελλάς Black & Decker (Ελλάς) Α.Ε. Στράβωνος 7 & Βουλιαγμένης 159 Γλυφάδα 16674, Αθήνα España DEWALT Parque de Negocios “Mas Blau” Edificio Muntadas, c/Bergadá, 1, Of.
